Measuring Instruments/
Test Equipment

Weighing balances
At this page you will find a range of our weighing balances. Every six months a selection and a list are drawing up by PCE-Group company to help you to find weighing balances that best suit your needs. The fact that we are able to offer you a wide range of weighing balances to be used for many different sectors such as: industry, laboratories, packaging companies, home, etc... is what make us important. We have many different models of weighing balances to cover a lot of sectors. All our products are delivered with a calibration, a verification and/or a laboratory certification (ISO calibration). If you wish, you can see a complete selection of all our balances divided into different groups visiting the links: Balances - General view. If any doubt please contact us and our engineers and technicians will be available to help you asses of our balances as well as any other meters that best suit your needs. Call us on our office: +44 ( 0 ) 191 377 3398.

Technical specifications of our weighing balances can be found at the following links:

- PCE-PB series weighing balances 
  (weighing balances to calculate the mass of packages, with RS-232 interface)

- PCE-BS series weighing balances 
  (There are 3 different models of weighing balances on the weight (300, 3000, 6000 gr.))

- PCE-CBS 15 series weighing balances
  (verified weighing balances for piece count function and professional weighing)

- PCE-BTS 15 series weighing balances 
  (verified weighing balances, dual display, maximum range of 15 Kg., readability de 5g)

- PCE-LSM series weighing balances
  (verified, to be used as laboratory balances, dentistry balances or gold balances)

 - PCE-LS series weighing balances
  (verified weighing balances, with RS-232 interface to be used in laboratories)

 - PCE-ABZ 200C series weighigng balances
  (calibrable, weighing balances to be used in laboratories, dental clinics, ...)

 - PCE-AB series weighing balances
  (weighing balances verified in the range of 0,1 mg, internal calibration, RS-232)

- PCE-HS 50 series weighing balances
  (low-cost weighing balances to calculate small hanging loads)

- PCE-CS series weighing balances
  (low-cost weighing balances, to hang loads up to 1000 kilograms)

- PCE-MCWLT5M series weighing balances
  (verified, digital, industrial, powered by batteries, up to 5000 kg, with remote control)

- PCE-MB series weighing balances
  (weighing balances to determine the remaining dry substance after a drying process)

- PCE-JS 50 series weighing balances 
  (weighing balances with the highest accuracy / resolution of 0,001g)

- PCE-JS 100 series weighing balances
  (weighing balances with a range of 0 ... 100 g, resolution 0.01 g, units g / ct)

- PCE-BSH series weighing balances 
  (low-cost weighing balances, for unexperienced people, with piece counting function)

- PCE-PM SST series weighing balances 
  (waterproof weighing balances of stainless steel with IP 67 protection, range up to 60 kg)

- PCE-PS 150MXL series weighing balances 
  (weighing balances totally made in steel IP 67/ IP 68, water resistant, ranges 60 kg)

- PCE-PM series weighing balances 
  (verified, ranges up to 60, 150, 300 kg, GLS, UPS and DHL software can be applied)

- PCE-LSZ 200C series weighing balances
  (Accurate weighing balances, very useful for hand hopping)

- PCE-EP E series weighing balances
  (two versions available of weighing balances (range of 3000 kg and 5000 kg))

- PCE-EP 1500 series weighing balances
  (weighing balances powered by battery (2.000 kg) for internal weights)

- PCE-PW 2000 series weighing balances
  (weighing pallet truck with an internal balances for industry, weighing range 2.000 kg)

To meet the ISO standard, many of our meters and balances can be calibrated as well as recalibrated. So, our weighing balances can be used in your internal quality control as well as you can calibrate them regularly to ensure you accuracy and stability. Besides, many of our balances are also verified. Verification can be carried out by PCE Group company (class I and II) or by your local authorized verification centre. On the contraty, Class II balances can be only verified in their work place. Once an official verification has been done weighing balances cannot be recalibrated using an external calibration weight. The first verification is valid for two years, but each following validation is good for one year and must be done annually by PCE Group company or by the authorised verification

If you wish to view or print a selection of weighing balances from our catalogue, click the PDF symbol

You are currently at: Home / measuring instruments and test equipment / balances / weighing balances

This page in German in Italian  in Spanish in Croatian   in French

Below you will find an overview of the different product groups of balances

Below you will find an overview of the different product groups of measuring instruments