 |
|
- Contact
us Other instruments: - Measures
-
Scales |
 |
| |||||||||||||||||||||||||||||||||||
|
Moisture Analyser RH 120-3 |
|
|
|
|
|
- Explanatory user guide in the display - Wide weight range up to 120 g - The last measured value remains on the display until new measurement erases it - 2 infrared quartz crystal emitters, each 205 W - Sight window over the sample, extremely useful during initial adjustment - RS-232 data interface for connection to a printer or PC - 30 plates for samples are inclusive - Application table, many practical examples in the service instructions - Mains adapter: automatically delivered with country specific mains power supply, available in EU, UK, AUS and USA - 3 years warranty |
|
|
|
|
| Weighing measurements: | |
| Weight range | 120 g |
| Readout | 1 mg |
| Dry measurements: | |
| Read out | 0.01% |
| Reproducibility, weight 1 g | 0.2% |
| Reproducibility, weight 10 g | 0.02% |
| Display after drying | |
| % humidity = weight reduction | 0...100% |
| % dry mass = residual weight | 100...0% |
| % ATRO | 100...999% |
| g humidity = liquid substances/weight reduction | |
| g dry mass = solid substances/residual weight | |
| Heater/temperature adjustment: | |
| Temperature range 40...250°C | in steps of 1°C |
| Fixed heating stages (constant heat) | 20 |
| Pre-heating stages to reduce drying time | 1...99 min |
| Drying sequence/switch-off criteria: | |
| Fully automatic | drying until weight becomes constant |
| Semiautomatic |
drying ends when loss per unit of time goes below theoretical value |
| Manual | 1...200 min |
| Check of measure value | interval adjust. of 0.1...10 min |
| Technical specifications: | |
| Display | 13 mm LED-Display |
| Total dimensions | 240 x 270 x 245 mm (W x D x H) |
| Net weight | ca. 7 kg |
| Options (for an extra price): Date/Time Function; for installation |
|
| Delivery content: 1 x Moisture Analyser, 30 x plates for samples, 1 x protective working cover, 1 x mains adapter and user manual |
|
 |
 |
|
Contact: |
|
