Cable detector PCE-191 CB
cable detector to detect cables and power lines in walls and cable ducting

The cable detector is used for locating cables and power lines in walls. This cable detector is both a transmitter and a receiver. The transmitter of the cable detector has a connector that can be connected  to a power connector (max. 240VAC) and emits an acoustic signal for live cables. It can follow the signal of a cable with the receiver from the wall to the fuse. If the cable detector finds an interruption in a cable, the signal goes off. It's also possible to easily locate the fuse for a cable when it's not clearly marked in a fuse box. Connect the transmitter of the cable detector to the corresponding circuit connector and use the receiver to find the correct fuse. The line can be kept live while all of these functions are performed. At this link you will find other types of a high quality cable detector.

• Pocket-sized tester

• Follows cables in walls or cable ducting

• For detecting interruptions

• Acoustic alarm goes off when interruptions are detected

• Detects cable interruptions in walls

• Live cables can be detected, it's not necessary to remove the fuse

• Adjustable sensitivity

• Easy to use

• Compact design

• safety: CE, IEC / EN 61010-1:01

PCE-191 CB cable detector

View or print the user's manual

The PCE-191 CB cable detector connects the transmitter to the socket, and the receiver follows the signal.

With the PCE-191 CB cable detector you can follow the signal to the fuse box and detect the respective fuse.

Contents
PCE-191 CB cable detector with signal transmitter / receiver, battery carrying case and user's manual

Here you will find all the measuring instruments available at PCE Instruments.

This page in German in Italian in Spanish in Croatian in French

Below you will find an overview of the different product groups of measuring instruments