Clamp Meter F01
Clamp meter with real-time RMS measuring / AC measuring / voltage measuring
display-hold-function / automatic shutdown function / high voltage warning

The Clamp Meter F01 is designed for easy measuring of alternating current. In addition, the clamp meter can also determine the AC/DC voltage. Further functions of the clamp meter are resistance measurements and continuity testing. When high voltage is detected, the clamp meter will give out a warning. The clamp has a diameter of 26mm. The power supply of the Clamp Meter F01 is provided by a 9V battery. With this, the clamp meter can perform up to 25,000 measurements. Finally, the automatic shutdown function is another high quality feature of the clamp meter. If there are any questions about this Clamp Meter F01 have a look at the technical specification below or call: + 44 (0) 2380 98703 0. Our technicians and engineers will gladly advise you in all clamp meters and all products in the field of measuring instruments, regulation and control and scales.

- RMS measuring 
- High voltage warning
- AC measuring (A, V)

- Continuity tester
- Resistance measuring
- Automatic shutdown function

Technical Specifications of the Clamp Meter F01

AC A measurements

Range

Resolution

Accuracy

0.2 A … 39.99 A

10 mA

± 1.5 % + 10 digits

40 A … 399.9 A

0.1 A

± 1.5 % + 2 digits

400 A … 600 A

1 A

± 1.5 % + 2 digits

AC / DC V measurements

Range

Resolution

Accuracy

0.2 V … 39.99 V

10 mV

± 1 % + 5 digits

40 V … 399.9 V

0.1 V

± 1 % + 2 digits

400 V … 600 V

1 V

± 1 % + 2 digits

Electrical resistance measurements

Range

Resolution

Accuracy

0 Ω … 399.9 Ω

0.1 Ω

± 1 % + 3 digits

Continuity testing

Acoustic signal

R < 40 Ω

General Technical data of the Clamp Meter F01

Display 

LCD with 4,000 digits

Clamp diameter

< 26 mm

Power supply

9 V battery

Operating duration

25,000 measurements at 10 seconds

Dimensions

70 x 193 x 37 mm

Weight

260 g

Protection class

IP40

Operating conditions

0 … 50 °C
0 … 90 % humidity

Standards

EN 61010-1
EN 61010-2-032
Installation category: III
Operating voltage: 600 V

Electromagnetic compatibility

EN 61326-1 

Delivery contents of the Clamp Meter F01

1 x Clamp Meter F01, 1 x set of measuring lines, 1 x carrying case, 1 x 9 V battery, 1 x user
manual

Here you can find further similar products regarding 'clamp meters':

- Clamp Meter F03 
  (clamp meter AC / DC voltage and resistance measurement)

 - Clamp Meter F05 
  (clamp meter for single-phase performance measurement, measurement of starting current)

- Clamp Meter F07 
  (clamp meter with inrush measurement, performance measurement and measuring adapter input)

- Clamp Meter F09 
  (clamp meter for measurement of direct current and alternating current, performance measurement)

More clamp meters of PCE Instruments:

- PCE-DC 1 Clamp Meter 
  (Clamp meters up to 200 A AC/DC, frequency measurement included, voltage surge category III)  

- PCE-DC 2 Clamp Meter 
  (Clamp meters up to 200 A AC/DC, ohms measurement included, voltage surge category III) 

- PCE-DC 3 Clamp Meter 
  (Clamp meters up to 80 Amp AC/DC with high resolution, category III surge protection)

- PCE-LCT 1 Clamp Meter 
  (Clamp meters up to 100 A AC, category III)

This page in German in Italian in Spanish in Croatian in French in Hungarian in Turkish in Polish in Russian in Dutch in Portuguese in Portuguese

Below you will find an overview of the different product groups of measuring instruments