DC Meter PCE-N20H
DC Meter with input for direct current and direct voltage / 5 - figure display / 
internal real-time clock / optional Open Collector output / frontal IP 65

The DC meter PCE-N30H is designed to measure direct voltages up to 600 V as well as well as direct currents up to 6 A. Thus the DC meter PCE-N30H qualifies itself as a device to monitor direct currents and direct voltages. The DC meter features a 5-figure display, which can change its colours whenever it reaches preset thresholds. The input signal can be scaled eligibly by means of 21 pairs of variants. Thus even measuring curves can be displayed that do not have a linear characteristic. The integrated real-time clock offers the option to display the current time. Via the optionally programmable analogue output the measured values can be transferred. This function allows to protocol the values that the DC meter captures by writing them down. In combination with the analogue output the DC meter is also equipped with a RS485 interface to communicate via Modbus RTU protocols with other devices. In case that you should have more questions regarding the DC meter PCE-N30H, please read the following technical data, use our contact form or call us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703 Our technicians and engineers will gladly advise you regarding the DC meters or all other products in the field of Control Systems, Laboratory Equipment, Measuring Instruments or Scales and Balances of PCE Instruments Ltd.

- 21 point scaling
- Front IP 65
- Direct current and direct voltage

- Two alarm outputs
- Display of current time
- Optional RS-485 interface

Technical specifications

Measuring ranges

Voltage

-

- 200 ... 200 V DC

- 600 ... 600 V DC

Current

 2 ... 2 A DC

- 6 ... 6 A DC 

Time

00.00 ... 23.59 

Scaling

21 points

Display

5-figures 7 segments LED display, three colours

Display range

-19999 ... 99999

Display unit

eligible (56 available units)

Sensor power supply

24 V DC, max. 30 mA

Outputs

2 alarm relays
RS485-interface

4 ... 20 mA or 0 ... 10 V (programmable)

Open Collector

Surrounding conditions while operating

- 25 °C ... 55 °C

25 ... 95 % rH

Surrounding conditions while stored

- 33 °C ... +70 °C

25 ... 95 % rH

Dimensions

96 mm x 48 mm x 93 mm

Switch board size

92 mm x 45 mm (according to  DIN)

Power Supply

85 ... 253 V AC (45 ... 65 Hz) AC / DC
20 ... 40V AC (45 ... 65 Hz) AC / DC

Protection type

IP 65 front

Weight

< 200 g

Montage

Montage clips with clamp screws, connection via clamping strip

Enclosure

Robust synthetic enclosure

Standards

CAT III according to EN61010-1

The DC meter PCE-N30H is due to its IP65 protection at the front even under rough conditions applicable.

Delivery Content

1 x DC meter PCE-N30H, installation equipment, instruction manual

Editions

Similar products to the DC Meter PCE-N30H:

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments