Hand Held Force Gauge of NR-Series (0 - 10 to 0 - 1000 N)
very precise force measuring gauge with RS 232 interface 

The NR series are digital push pull force meters which measure the tension or compression applied to the probe (the meters have a precision force transducer to measure the compressive and tensile forces). The force meter is very easy to operate and handy to carry out. The RS 232 interface allows to transfer the force measurement data to a PC or portable while automated testing and for process control. Its metal casing is resistant and offers superior protection against external electromagnetic interference while the rubberized coating protects it from shocks and falls.

Also the force gauge can be mount on the test stand (by using the adaptor plate) for doing several force measurement series in research and development.
The force gauge of NR series is mainly in use in industrial (machinery, medical, biomedical, chemi- cal) research & development and various educational force measurement applications. So the gauge is very valuable in product development, packaging testing, transportation testing...

- lightweight
- easy to use
- robust housing (s
- provides fast and accurate force 
  measurements 
- direct reading of tension (+) and 
  compression (-) forces
- choosable measurement ranges 
  (N, kN, daN, g, kg, lb, oz)
- programmable tolerance ranges
- RS 232 connection and digimatic 
  analogue output
- peak data hold for compression  
  and tension forces
- cmemory
- display freezes force data
- overload protection of 150 %
  (full scale, displays up to 105%)
- overload displayed
- backlit grafical display (with 
  bargraph)



force gauge of NR-series with grafical display

- battery operated (internal battery)
- low battery displayed (voltage control)
- 8 hours of operation without recharging back
- ISO calibration certificate, software, test stand and grip 
  handles are additional available 

software
Force Gauge NR: graphical software for data aquisition displays the measured force data The software allows data transfer to a PC, to do graphs / charts while measuring.

All data can also be send from the force gauge to other graphi- cal software as the well known Excel... 
technical data
force meter model NR 10N NR 50 N NR 100 N NR 250 N NR 500 N NR 1000 N
range 0 - 10 N 0 - 50 N 0 - 100 N 0 - 250 N 0 - 500 N 0 - 1000 N
resolution 0.001 N 0.005 N 0.01 N 0.02 N 0.05 N 0.1 N
accuracy +- 0.1 %
data capture rate 1 Hz
display graphical with bargraph and 5 digits
power supply internal, rechargable battery
net weight 460 g
dimensions 230 x 65 x 35 mm

delivery
1 force meter NR (one of the above mentioned models), hooks, adaptors, pins, 1 x battery, 1 x battery charger, user manual

additional tools (please order separately)
- ISO calibration certificate
- software package including RS 232 connection cable
- test stand (requires adaptor plate)
- adaptor plate for test stand
- grip handles

note
keep care at using the force meters 
force overload while measuring will destroy the inner load cell

back to the onlineshop entrance back to the industrial-needs homepage

contact information:
PCE Group
Im Langel 4
D-59872 Meschede
Germany
tel. +49 (0) 2903 / 97 290-46
fax +49 (0) 2903 / 97 290-40

back