Digital Voltmeter DMM PCE-DM 32
digital voltmeter with RS-232 interface and CAT III 1000 V standard

This solid DMM PCE-DM 32 digital voltmeter has a clear high contrast backlight LCD display as well as a 3 ¾ positions of max. 4000 indicator. The DMM PCE-DM 32 digital voltmeter meets with the CAT III/1000 V standard. Moreover, there are available warning and security indicators in the LCD display which are used to avoid a wrong biasing in control mechanisms, to detect faulty fuses and voltage connections. The digital voltmeter also indicates that  the voltage has to be disconnected when passive functions occur. Other voltmeter models with multifunction, graphics, interface and software (oscilloscope, multimeter, logic analyser) can be found here. We will be happy to advise you on this voltmeter and of course, on the other products in the field of regulation and control, measuring instruments and scales or balances.

 DMM PCE-DM 32 Digital voltmeter with RS-232 interface 
and software for data to be transferred.

- Multiple functions: AC/DC V. AC/DC A-, measurements, Ohm, Frequency, Capacitance and Temperature. ,° C/° F units can be chosen, working cycle can be determined, diode test and pitch control in semiconductor components.

- Relative value measurement function and measurement value detention.

- Automatic shut-off

- Diode test function

- Overload protection

- Security: IEC-1010-1, UL-1244, CAT III 1000 V/CAT IV 600 V

- Delivery contents: cover, testing cables, temperature probe type K, RS-232 data cable, software in the diskette, 9 V battery and user's manual.

Technical specifications

DC voltage

400 mV / 4 / 40 / 400 / 1000 V
± 1.2 % + 2 dgt. - 100 μV

AC voltage

400 mV / 4 / 40 / 400 / 750 V
± 0.8 % + 3 dgt. - 100 μV

DC current

400 μA / 4 / 40 / 400 mA / 20 A
± 1,5 % + 3 dgt. - 100 nA

AC current

400 μA / 4 / 40 / 400 mA / 20 A
± 1.8 % + 5 dgt. - 100 nA

Resistance

400 Ω / 4 / 40 / 400 kΩ / 4 / 40 MΩ
± 1.0 % + 2 dgt. - 100 mΩ

Capacitance

40 / 400 nF / 4 / 40 / 100 μF
± 3.5 % + 5 dgt.- 10 pF

Frequency

10/100 Hz/1/10/100 kHz/1/10 MHz
± 1.2 % + 3 dgt. - 1 mHz

Temperature

 -20 °C ... 1000° C;   ±3 % + 2 dgt. - 0,1 °C

Over-voltage category

CAT III 1000 V / CAT IV 600 V

Power

 9 V battery

Dimensions

88 x 197 x 41 mm

Weight

390 g

Delivery contents
1 PCE-DM 32 Digital voltmeter, software, RS-232 data cable, 1 battery, a cover, testing cable,  thermo-element class K and user's manual.

Options
- SO calibration certificate
For companies that wish to include this device in their set of internal testing tools or for annual recalibrations. The ISO certificate includes a laboratory calibration and a control document with all the measurement values. ISO calibration certificate can be carried out in voltage (AC / DC) or in current.

- Amp clamp adaptor
  Adaptor for indirect measurement of current up to 1000A without interrupting the cable.
   - Range: 200 / 1000A DC / AC
   - Accuracy: ±1.5 / 2%
   - A DC zero reset
   Dimensions: 190 x 64 x 33mm
   Maximum diameter of cable: 33.5mm

 - Revolution adaptor
 Adaptor with revolutions sensor and 1m cable.
   For optical measurement of revolution between 100 and 20,000 RPM in two ranges.
   - 0.1mV DC / 1 RPM   (range 1)
   - 0.1mV DC / 10 RPM (range 2)
   Dimensions: 190 x 73 x 37mm

 - Pressure adaptor
Adaptor with pressure sensor and 1m cable.
  For absolute mesaurement of pressure between 3.5 and 3500kPa.
   - Accuracy: ±1% (up to 1700 kPa); ±2% (up to 2400 kPa) and ±5% (up to 3500 kPa)
   - Resolution: 0.1/ 1 kPa
   Dimensions: 100 x 50 x 25mm; 1/4" sensor

 - Humidity adaptor
Adaptor with humidity sensor in a handle and with 1m cable.
   - Range: 10 to 95% r.h.
   - Accuracy: ±3% r.h.
   - Resolution: 0.1% r.h.
   Dimensions: 100 x 50 x 25mm

 - Light adaptor
Adaptor with light sensor and 1m cable.
   - Three rages: 0 to 2000 / 0 to 20,000 and 0 to 50,000 lux
   - Accuracy: ±5%
   - Resolution: 1, 10, 100 lux
   Dimensions: 100 x 50 x 25mm

 - Air velocity adaptor
Adaptor with an air velocity sensor and 1m cable.
   - Range: 0.2 to 30 m/s;
   - Accuracy: ±2%
   - Resolutin: 0.1 (m/s; km/h; knots)
  Dimensions: 100 x 50 x 25mm

 - Sound adaptor
Adaptor with sound sensor and 1m cable.
A-weighting; can be externally calibrated
(PCE-SC 41 calibrator)
   - Ranges: 30 to 130dB (in three ranges)
   - Accuracy: ±1.5dB (IEC 651 clase II)
  Dimensions: 107 x 53 x 29mm

- EMF adaptor
   Adaptor with EMF sensor and 1m cable.
   Range: 0 to 20 microTesla / 200 milliGauss
   Accuracy: ±4%
   Resolution: 0.1 µTesla / 1 milliGauss
   Bandwidth: 30 to 300 Hz
   Dimensions: 100 x 50 x 25mm 

Here you will find an overview of all the measuring instruments available from PCE Instruments.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian in French .

Below you will find an overview of the different product groups of measuring instruments