PCE-G 5100
function generator
1 Hz - 15 MHz / frequency sweep function / external
FM modulation / TTL output
sinusoidal, triangular and rectangular waves generator / offset
The PCE-G 5100 function generator
comes with a frequency range up to 15 MHz (triangular signal up to 100 kHz)
and three different waveforms (sinusoidal, triangular and rectangular
waveforms). The PCE-G 5100 function generator offers the possibility to
adjust amplitude and the offset as well as to disturb the output signal
symmetry between the 10 and the 90 %. It is also possible to set a 20 dB
attenuation by pressing a button. The frequency sweep function allows to
verify a frequency range by means of previous adjusting the interval. With
the PCE-G 5100 function generator it is also possible to modulate output
frequency through a VCF-IN control entry. The PCE-G 5100 function generator
is handled by means of a rotatory button. The most used functions can be also
activated by means of quick-access keys. The LCD display shows clearly the
most important magnitudes while the backlight allows to read the values
easily even with bad light conditions. Thanks to the RS-232 port you will be
able to control the PCE-G 5100 function generator form a long distance. Here you can find a selection of the
different frequency meters available at PCE-Group.
View / print user’s
manual of the PCE-G 5100 function generator
- Frequency range up to 15 MHz
- Sinusoidal, triangular and rectangular signals.
- Offset selection
- External FM modulation
- Frequency sweep function
- TTL output
- RS-232 port
- Backlight LCD display
The RS-232 and the data
cables are connected at the backside of the PCE-G 5100 function generator.
Technical
specifications
Frequency / resolution range
(triangular signal up to 100 kHz)
