Data
Logger Gas Detector Gasman II (EEx ia (d) IICT3/T4)
providing visual and audible alarms
|
|
The
gas detector Gasman ll is highly
cost-effective in design for when you need
protection against a single toxic, oxygen or
flammable gas or vapour. This gas detector is
often used to protect staff in gas and water
utilities, oil platforms and petrochemical
environments.
An other special feature of this gas detector
is the ability to collect data. The data
logger can save gas values up to 3000 hrs
(depending on sample rate (adjustable)). Via
the RS 232 interface the gas data can be
transferred from the detector to a PC or
portable.
|
- compact
& lightweight gas detector, making it
easy to wear all day
- oxygen,
toxic & flammable gas versions
available
- highly
visible & audible alarms. Piercing
85dBA siren, intense red flashing lights,
confidence "blip" and fully
adjustable alarm trigger levels
- rugged
casing, being water & dust resistant
to IP66 standard and optional rubber boot
for especially harsh environments
- safe to use,
with large backlit display, double-action
"off" button to prevent
accidental deactivation.
- one year dry
cell life for toxic and oxygen models
- windows
compatible
- vibrating
alarm accessory for use in noisy
environments
|
|
| technical data |
| gas
type |
range |
alarm
@ |
| flammable
gas |
0...100%
LEL |
20%
LEL |
| hydrogen
sulphide |
0...50,
0...100, 0...250 ppm |
10
ppm |
| carbon
monoxide |
0...500
ppm |
30
ppm |
| sulphur
dioxide |
0...10
ppm |
2
ppm |
| chlorine |
0...5
ppm |
0.5
ppm |
| nitrogen
dioxide |
0...10
ppm |
2
ppm |
| phosphine |
0...5
ppm |
0.5
ppm |
| ammonia |
0...50
ppm |
25
ppm |
| hydrogen
cyanide |
0...25
ppm |
10
ppm |
| hydrogen |
0...999
ppm |
100
ppm |
| oxygen |
0...25% |
19%
und 23% v/v |
sensors
(sensors are changeable) |
duration
time (T90) |
sensor
life |
| methane |
20
sec. |
5
years |
| toxic |
20
sec. |
3
years |
| oxygen |
10
sec. |
min.
1 year |
|
detector |
| data
logger: |
adjustable
sample rate; 30 ... 3000 hrs |
| acoustical
alarm: |
-
85dB(A) @ 1m, tone rate adjustable
- confidence blip
- triple blip every 10 sec. if battery is low |
| visual
alarm: |
ultra
bright red flashing LED pair
display indicates alarm types |
| vibration
alarm: |
single
frequency vibration at all alarm levels |
| display: |
7
segment high contrast LCD
10 mm character hight, backlight
symbols for peak hold, low batt, zero
mode,
calibration mode, alarm 1, alarm 2,
15 min TWA, 8 hour TWA |
| housing: |
ABS,
IP 66 |
power
supply:
toxic gas and oxygen models
flammable gas models |
3 x AA alkaline
nickel-hybride (rechargeable) |
battery
life:
toxic gas and oxygen models
flammable gas models |
3000 hrs
12 hrs (16 hrs recharge time) |
| total
dimensions: |
130
x 60 x 30mm |
| net
weight: |
210
g |
|
operating range
temperature:
|
-20
... + 50 °C, -4 ...
122 °F
|
|
humidity:
|
0
... 95 % rH (non condensing)
|
|
safety/ protection
codes:
|
EEx
ia (d), IIC T3/T4
Class I; Division I; groups a,b,c,d
EN 500 T4; EN 50020, EN 50271
USA UL 913
|
|
RF radiation:
|
EN
50081-2 (immunity: EN 50082-2)
|
|
delivery
1 x single gas detector Gasman II xx (for detection
of one of the gases of the above table), user manual
|
|
additional
- rubber boot
- earpiece
- combined belt and pocket clip
- charger/ comms interface unit (the charger
is
also used as comms interface)
- multi way charger
- calibration adaptor/ aspirator
- RS 232 connection cable
- windows compatible software
- spare battery pack
The additional aspirator pump can be used by
detecting gases at hidden places |
 |
 |
 |
|
contact
information:
PCE Group
Im Langel 4
D-59872 Meschede
Germany
tel. +49 (0) 2903 / 97 290-46
fax +49 (0) 2903 / 97 290-40 |
|
back |
