PCE-HT200 (Shore A) hardness tester digital device with protective rubber sleeve and RS-232 interface
|
The PCE-HT200 (Shore A) hardness tester is used as a handheld device for measurements at the workplace, such as testing materials in laboratory.
Because of its pocket size, it can be applied everywhere. The hardness tester comes with a measurement component and a digital display with a resolution of only 0.1 hardness units.
The PCE-HT200 can be used for line or series measurements and possesses a low
battery warning. The hardness tester can be used as a handheld device in production or in stationary mode if placed in the test position. The hardness tester comes calibrated from the manufacturer and includes an ISO calibration certificate.
If you return the device accompanied by the ISO calibration certificate, it will be recalibrated for an extra price.
The device has an RS-232 interface which, when used in conjunction with optional software, can allow data to be transferred to a computer.
At the following link you will find an explanation of the process for measuring hardness. You will also see a classification of the different grades of hardness if you click here.
In case of
questions regarding our hardness testers, please use our contact form or contact
us and we will help you to find the best solution for your needs. Our technical
staff will advise you regarding our products. Our engineers and technicians will
be happy to help you with the moisture analyzers, and of course, with the other
products in the field of regulation and control, and measurement instruments.
|
- Pocket sized
- For stationary or portable use - Meets hardness standards - Peak hold function - Auto shut-off after 5 minutes of inactivity - Low battery warning - Used for line or series measurements (for series measurements, it's necessary to have the optional test stand) - Optional software for data transfer - Optional ISO calibration certificate
|
PCE-HT200 hardness tester View or print the user manual
|
Technical specifications:
|
Measurement range
|
0 ... 100
|
Resolution
|
0.1 of a hardness unit
|
Accuracy
|
±1 hardness unit
|
Measurement values shown
|
actual hardness, maximum value, average value (retains the maximum value)
|
Interface
|
RS-232
|
Software and data cable
|
optional accessories
|
Other functions
|
auto shut-off, low battery indicator
|
Power
|
3 batteries of 1.25 V (V 357)
|
Operating time
|
approx. 300 h
|
Operating temperature
|
0 to 40°C
|
Dimensions
|
168 x 31 x 30 mm
|
Weight
|
145 g
|
Delivery content: 1 x PCE-HT200 hardness tester, 3 x batteries, 1 x case, 1 x calibration certificate and user manual |
- Test position The test position of the THS 2 hardness tester is designed to test in series, to obtain the most accurate results.
Subjective measurement error caused by wrong scheme contact pressure or non-vertical measurement are excluded. The test is done on a test table and the hardness tester goes down with a constant test force - with the help of a lever. The result is shown on the hardness tester itself. The device is made of aluminum. An adjustment allows the
examination of large and small parts.
|
|
- ISO calibration and ISO calibration certificate Shore A tester comes calibrated with an ISO calibration certificate from the manufacturer. After some time of being in use, variations in the instrument can appear and this affects the accuracy of the device. Upon your request we can perform a recalibration that meets ISO standards. This can also be ordered with the device (shipping time increases up to 5 days).
|
|
|
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments.
|
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|