 |
|
- Contact us Other instruments: - Measures - Scales |
 |
|
PCE-UT 803 Tabletop Multimeter |
|
|
PCE-UT Tabletop Multimeter can be used as a portable or fixed device. This tabletop multimeter can be powered via the mains or by batteries. Due to its wide measurement ranges, this multimeter can be used to cover all your needs. Along with determining DCV, ACV, DCA, ACA and resistance accurately, this multimeter also determines capacitance, frequency, revolutions and temperature, as well as performs continuity checks and diode tests. Data can also be transferred to a computer with the help of software included in the delivery (USB and RS-232 data cable are also included). The integrated data logger function allows the user to take measurements over a duration of time in machines and electrical installations. This tabletop multimeter comes calibrated from the factory and an ISO calibration certificate can be ordered with the device or as annual recalibrations. |
|
|
|
|
|
|
|
|
Integrated compartment accessories for the PCE-UT 803 Multimeter |
Additional components for the |
|
- Highly accurate - Automatic/manual range selection - DCV, ACV, DCA, ACA, resistance, capacitance, frequency, temperature, transistor tests - Continuity check and diode test - Measurement of the real effective value - Min./Max./HOLD functions - Auto shut-off function (it can be deactivated) |
- Battery indicator - Big back-light LCD display - USB and RS-232 interface - Software and data cable are included in the delivery - Powered via the mains or by batteries - Frequency measurement up to 60 MHz - ISO Calibration Certificate can be additionally ordered - Protected according to IEC . 1010; CAT I 1000 V/II 600 V |
|
|
|
| Technical specifications | |
| Measurement ranges | DCV: 600 mV/6/60/600/1000 V ACV: 600 mV/6/60/600/750 V DCA: 600/6000 µA; 60/600 mA; 10 A ACA: 600/6000 µA; 60/600 mA; 10 A OHM: 600 Ω; 6/60/600 kΩ; 6/60 MΩ Cap.: 6/60/600 nF; 6/60/600 µF; 6 mF Frec.: 6/60/600 kHz; 6/60 MHz Temp.: -40 °C ... +1000 °C |
| Resolution | DCV: 0.1 mV; 0.001/0.01/0.1/1 V ACV: 0.1 mV; 0.001/0.01/0.1/1 V DCA: 0.1/ 1 µA; 0.01/0.1 mA; 0.01 A ACA: 0.1/ 1 µA; 0.01/0.1 mA; 0.01 A OHM: 0.1/ 1/10/100 Ω; 1/10 k Ω Cap.: 1/10/100 pF; 1/10/100 nF; 1 µF Frec.: 1/10/100 Hz; 1/10 kHz Temp.: 1 °C |
| Accuracy | DCV: ±0.3% display indic. + 2 dgt (up to 600 V); ± 0.5% + 3 dgt (above) ACV: ±0.6% display indic. + 5 dgt (up to 600 V); ± 1.2 % + 3 dgt (above) DCA: ±0.5% display indic. + 3 dgt (also 60 mA); ± 0.8 % + 3 dgt (up to 600 mA) ± 1.2 % + 3 dgt (above) ACA: ±1.0% display indic. + 5 dgt (up to 600 mA) ± 2 % + 6 dgt (above) OHM: ±0.5% display indic.+ 2 dgt (up to 600 kΩ); ± 0.8 % + 2 dgt (a 6 MΩ) ±1.2 % + 3 dgt (above) Cap.: ± 2 % display indic.+ 5 dgt (up to 60µF) ±3 % display indic.+ 4 dgt (up to 60µF) ±5 % display indic.+ 4 dgt (up to 6 mF) Frec.: ± 0.1 % display indic.+ 3 dgt Temp.: ± 1.0 % display indic. + 3 dgt |
| Measurement quota | 2-3/s |
| Continuity check acoustic signal | below 30 Ω |
| Diode test | up to 2.7 V/1 mA |
| Ports | USB and RS-232 |
| Software data cable | Both are included in the delivery. They are compatable with all windows systems. |
| Display max. resolution | back-light LCD display with a maximum value of 5999 |
| Power | 230 VAC and/or 6 x 1.5 V batteries |
| Auto shut-off | after 10 minutes of inactivity (it can be deactivated) |
| Dimensions | 2408 x 105 x 310 mm |
| Weight | 2000 g |
| Enviromental conditions | max. 70% H.r./0 ... +50 ºC |
| Protection/Standard | IEC 1010-1, CAT I 1000 V/II 600 V |
| Use of the Multimeter | |
|
|
|
|
Tabletop Multimeter software |
|
|
|
|
|
Delivery content |
|
| Additional components
- ISO Calibration Certificate For companies that wish to include this device in their set of internal testing tools or for annual recalibrations. The ISO certificate includes a laboratory calibration and a control document with all the measurement values. ISO calibration certificate can be performed with current (AC/DC) or voltage (AC/DC). |
 |
| - Amp clamp adaptor Adaptor for indirect measurement of current up to 1000 A without interrupting the cable. Range: 200/1000A DC/AC Accuracy: ±1.5/2% A DC zero reset Dimensions: 190 x 64 x 33 mm Maximum diameter of cable: 33.5 mm |
 |
| - Revolution adaptor Adaptor with revolutions sensor and 1 m cable. For optical measurement of revolution between 100 and 20,000 RPM in two ranges. - 0.1 mV DC/1 RPM (range 1) - 0.1 mV DC/10 RPM (range 2) Dimensions: 190 x 73 x 37 mm |
 |
| - Pressure adaptor Adaptor with pressure sensor and 1m cable. For absolute mesaurement of pressure between 3.5 and 3500 kPa. Accuracy: ±1% (up to 1700 kPa); ±2% (up to 2400 kPa) and ±5% (up to 3500 kPa) Resolution: 0.1/1 kPa Dimensions: 100 x 50 x 25 mm; 1/4" sensor |
 |
| - Humidity adaptor Adaptor with humidity sensor with handle and 1 m cable. Range: 10 to 95% r.h. Accuracy: ±3% r.h. Resolution: 0.1% r.h. Dimensions: 100 x 50 x 25 mm |
 |
| - Light adaptor Adaptor with light sensor and 1m cable. Three ranges: 0 to 2000/0 to 20,000 and 0 to 50,000 lux Accuracy: ±5% Resolution: 1, 10, 100 lux Dimensions: 100 x 50 x 25 mm |
 |
| Air velocity adaptor Adaptor with an air velocity sensor and 1 m cable. Range: 0.2 to 30 m/s; Accuracy: ±2% Resolutin: 0.1 (m/s; km/h; knots) Dimensions: 100 x 50 x 25 mm |
 |
| - Sound adaptor Adaptor with sound sensor and 1 m cable. A-weighting; can be externally calibrated (PCE-SC 41 calibrator) Ranges: 30 to 130 dB (in three ranges) Accuracy: ±1.5 dB (IEC 651 class II) Dimensions: 107 x 53 x 29 mm |
 |
| - EMF adaptor Adaptor with EMF sensor and 1 m cable. Range: 0 to 20 microTesla/200 milliGauss Accuracy: ±4% Resolution: 0.1 µTesla/1 milliGauss Bandwidth: 30 to 300 Hz Dimensions: 100 x 50 x 25 mm |
 |
 |
 |
| Here you will find an overview of all the measuring instruments available at PCE Instruments. | |
|
Contact: |
Contact: |
