Oscilloscope - Data Logger PKT 1230
digital data logger oscilloscope with logic analyser up to 16 channels / 200 MHz bandwidth / sequence of measurement of 1 GS /s per channel / registry  up to 2.000.000 memory points per channel / USB pen direct registry

This Oscilloscope Data Logger PKT-1230 200 MHz has a 16-channel logic analyser. The display of data in the oscilloscope data logger is done through a 8" TFT colour screen with good resolution and backlighting. By means of the USB port, it allows the rapid transmission of massive data to a computer. The electronic equipments are increasingly more complex and the number of digital circuits and serial bus systems are increasing. Because very often the test signal is analog or digital signals, you need a scanner that can verify these signals, as it happens with the oscilloscope data logger PKT-1230. The oscilloscope data logger allows multiple applications, for example in the area of training, in services and in quality control systems. The measurement values can be stored directly onto the USB stick. The internal memory of the oscilloscope data logger has a capacity of 2,000.000 points per channel. The different trigger modes of the Oscilloscope Data Logger PKT-1230 facilitate measurements. Here you will find and overview of several oscilloscopes.

- Direct connection to USB pen

- Measuring sequence for each channel:1 GS / s in real time

- Maximum sensitivity: 1ns

- 200 MHz bandwidth

- 2.000.000 points for each channel memory

- 66 MHz bandwidth

- Up to 16 channels

- Measurement rate input ± 15 V

- 4M / channel memory (from 16 k to 400 MS/s)

- Sampling velocity form 20 S / s to 400 MS / s

Technical specifications

Oscilloscope

Bandwidth

200 MHz

Display

20 cm, TFT 8" (640 x 480 pixels)

Measurement values registry

Sampling velocity in current time

1 GS/s (current time) for each channel

Measurement sequence

regular, peak, average

1 ns - 100 s / div

Vertical component

Sensitivity

2mV - 10 V / div

Input coupling

DC, AC, GND

Input resistance

1 MΩ ±2 % in parallel with 15 pF ±3 pF

Maximum input voltage

400 V/DC and AC ss

3 %

8 bit

Raising flank 

< 1.7 ns

Trigger

Trigger mode

flank, videoalternate, 

20 parameters

Mathematic waveform

addition, subtraction, multiplication, division, FFT

Logic analyser

66 MHz

16

20 S/s up to 400 MS/s

1 MΩ ±2 %

± 15 V

Limit voltage value

± 10 V (4 settings)

Trigger mode

flank, bus, status, synchronised, trigger pattern, trigger, lineal sequence

Trigger position setting

before, centre, after

Memory

4 M points (16 k to 400 MS/s)

Memory settings

10

binary, decimal, hexadecimal system

Technical specifications

AC 100 ... 240 V AC / 50 Hz

Dimensions (width x height x depth)

370 x 180 x 120 mm

Weight

2.2 kg

Delivery contents 
1 x  Oscilloscope - Data Logger PKT 1230, 2 x probes with BNC connection, 1 x USB cable,  1 x software, 1 x probe point, user’s manual

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian in French

Below you will find an overview of the different product groups of measuring instruments