PCE-UT 2202C Oscilloscope with memory
digital oscilloscope with two channels and coloured display/ sampling velocity in real time of 500 MS/s / FFT analyser and other mathematical functions / connection for USB pen

The PCE-UT 2202 oscilloscope with memory comes with diverse powerful functions. Apart from both a sampling velocity in real time of 500 MS/s and a measuring sequence of 25 GS/s, the PCE-UT 2202 oscilloscope with memory offers you some other trigger functions and analysis ones to allow an easy detection and analysis of the signals. The mathematical functions allow for a direct arithmetic connection between both channels. Through the FFT analysis the frequency spectrum of the signal can be even analized. The PCE-UT 2202 oscilloscope with memory has a zoom to be able to see all the smallest details. Thanks to its storage function, all the registered curves can be recovered to be analyzed on the display, or they can be recorded in the USB pen. The auto measurement function shows directly up to 9 different parameters. The “Auto” key enables this oscilloscope to self-optimize the settings for the search of waveforms. It used is optimized due to the fact that it has been adapted to the traditional placement, so it is possible to teach quickly to the personnel. Thanks to its dimensions and its light weight the PECE-UT 2202C oscilloscope can be also used as a mobile instrument. Here you can see another oscilloscope model with multiple functions (oscilloscope, multimeter, logical analyzer, …). At this link you will find an overview of all the oscilloscopes available at PCE Group.

 - Measuring sequence for each channel: 250
   MS/s in real time
 - Maximum sensitivity: 2ns
 - Automatic measurement functions: up to 19
   parameters.
 - Internal storage for settings and signals.
 - Direct connection to USB pens for signals
   registration.
 - Mathematical functions
 - Function to help users in English
 - Standard: IEC61010; CAT II, 600 V
 - Delivery includes a mains adaptor, a data cable
   and two probes.

View / print user’s manual of the
PCE-UT 2202C oscilloscope

Technical specifications

Sampling velocity

Sampling velocity in real time

500 MS/s

Measurement sequence

25 GS/s

Horizontal component

Temporary base

2 ns - 50 s / div

Internal storage

1024 kb

Signal interpolation

sin (x) / x

Vertical component

Analogue bandwidth

200 MHz

Sensitivity

2mV - 5 V / div

Input coupling

DC, AC, GND

Input resistance

1 MΩ ±2 % in parallel with 24 pF ±3 pF

Maximum input voltage

400 V/DC y AC Peak

 A/D transducer

8 bit

Sensitivity

2 mV - 5 V / div

Trigger

Trigger mode

AUTO, NORM, SINGLE

Trigger coupling

DC, AC, LF-REJ, HF-REJ

Hold off

100 ns - 1,5 s

Trigger signal

flank, impulse, video

Measuring functions

Automatic measurements

Peak value, average value, real value, frequency, period, work cycle, impulse width, up and down flank and other magnitudes

Automatic settings

Horizontal and vertical frequency as well as trigger level.

Cursor

Vertical and horizontal broken line, reference, voltage, time, frequency, automatic or manual synchronization

Memory / storage function

10 settings, 10 signals

Special functions

Automatic calibration

Mathematical functions

To add, to subtract, to multiply, to divide, FFT analysis
Average: 2 - 128; Interpolation: sin (x)/x; Zoom

Display

5,7" (145 coloured display,  5,7" (145 mm))

Power

AC 100 .. 240 V, 45 ... 440 Hz, 50 VA

Dimensions (width x height x depth)

320 x 150 x 130 mm

Weight

4,1 kg

Delivery contents
1 x PCE-UT 2202C digital oscilloscope, 2 x probe heads, 1 x software, 1 x mains cable, 1 x data cable, user’s manual.

Additional devices
- Replacement probes
- DIN ISO Calibration certificate

Through the digital interface it is possible to transfer in real time an image to a computer. It is also possible to control the oscilloscope from a computer.

The USB pen which is placed under the display can be easily connected to the oscilloscope. USB pens are automatically recognized and can be used for signals registration.

Settings can be recorded to be used in similar measurement procedures.

The waveforms can be analyzed in real time through the software. Images can also be recorded in bmp format with this oscilloscope.

The image at the right shows the PCE-UT 2202C digital oscilloscope measuring quartz oscillations. Thanks to the “Autotaste” key, it is possible to perform a measurement quickly if the corresponding parameters are not fitted.

If you wish to view or print the section from our catalogue that corresponds to oscilloscopes,
please click on the PDF symbol:

Contact:
Companies House England
Tursdale Business Park
Co. Durham - DH6 5PG
United Kingdom
Phone. +44 ( 0 ) 191 377 3398
Fax +44 ( 0 ) 191 377 3357

This page in German in Italian in Spanish in Croatian in French

Below you will find an overview of the different product groups of measuring instruments