|
Particle counter series KM
3887
Particle
counter for
measuring the
particle
content
in
the
atmosphere /
particle counter with a 0.3,
0.5
and 5
microns;
thickness
of
/ RS-232
and
software |
|
The particle counter
KM 3887 measures the concentration of
particles such as dust, soot, pollen and other
aerosols in the air. The particle counter KM 3887
has been developed to accurately detect the
degree of air pollution. The pollution is mainly
generated by combustion, materials processing,
manufacturing, power generation, vehicle
emissions and the construction industry. With
the help of the Particle counter KM 3887 you will
be able to measure the precise amount of
particulate pollutants in the air. You will find
high levels of air pollution especially in
cities and the industry sector. Each time it is
more important to know the level of air
pollution with particles harmful to health, eg
soot which is emitted mostly by industry and
diesel engine vehicles without a special filter.
These particles are among other things
responsible for reducing the visibility, the
aspiration of poisonous substances and therefore
a reduced work effectiveness. Also it has been
known for a long time that particles can be one
of the agents causing diseases such as asthma,
bronchitis, skin diseases and respiratory
diseases.
The light meter has
been developed for easy and fast use. It is
advised to familiarize with the instrument and
the different atmospheric conditions. It is
normal that the counts show larger fluctuations.
That depends e.g. of daily changes in
atmospheric conditions.
The particle counter was developed for easy use
and fast. Are advised to familiarize themselves
with the instrument and the different
atmospheric conditions. It is normal that the
counts show larger fluctuations. That depends
for example on daily changes in atmospheric
conditions. |
|
|
|
Consider the tendencies
in the particle concentration for extended
periods, rather than differences in consecutive
measurements. The Particle counter works in
different modes (individual measurement, ISO
<C4, in continuous mode, remote, etc..) and
it displays the result on the screen until the
uni switches off. The Particle counter is very
suitable for rapid detection of the degree of
air pollution and it is an economical
alternative to other methods of measurement and
more expensive equipment. You will find an
overview of all particles meters here.
The Particle counter:
-
Displays 3 particle sizes
simultaneously on screen
-
Has a memory for 8000 values
-
Is
powered by a rechargeable battery.
-
is valid for measurements according to
ISO 14644-1.
|

Particle counter KM 3887 |
|
Uses
The
Particle counter is used primarily in clean white
rooms, pharmaceutical laboratories, food
industry, the leak testing facilities in almost
all industrial sectors, aviation and
astronautics, clinics and hospitals and
institutional research .
|
|
Technical
specifications |
|
Particle thickness
|
0,3
µm / 0,5 µm y 5 µm
|
|
Coincidence error
|
<5
% in 2.000.000 particles
|
|
Light source
|
laser diode
(sensor
average life: 30.000 hours)
|
|
Measurement time /
rate
|
2,83 l/min;
|
|
Measurement range
|
1s to 99 min, 59 s
( 1s steps)
|
|
Counting alarm
|
1 to 99 or
continued
|
|
Measurement modes
|
individual /
repetitive / continued / claculation / remote /
ISO <C4;
|
|
Port
|
RS 232 or RS 485
|
|
Memory
|
8000
values (in calculation mode, a measurement is
composed of 4 values)
|
|
Software
|
in English
|
|
Display
|
20 digits LCD and; 4 lines
|
|
Power supply
|
4 x AA
NiMH or alkaline batteries
AC
(100 ... 240 V) adapter
|
|
Battery life
|
3 hours approx. (continuous measurement)
|
|
Environmental conditions
|
10
... +30 °C , 20 ... 90 % HR.H.. (non condensed)
|
|
Dimensions
|
108 x 196 x 68 mm
|
|
Weight
|
680 g
|
|
Software
|
|
 |
|
Delivery contents
1 x
KM3887 Particle counter, 1 x software, 1 x data
cable,. 1 x zero filter,; 4 X rechargeable
batteries, 1 x mains
adapter and user's manual. |
|
Optional
components
|
|
-
ISO Calibration
Certificate
For
companies that wish to integrate the Particle counter
in its internal quality control or for
annual recalibration. Certification to ISO
contains a calibration laboratory that includes
the certificate with all data |
 |
|
-
Carrying case
The
case serves to protect the meter of particles
during transport and while it is stored for a
long time without being used. |

|
|
- Tripod
For prolonged
measurements, we always recommend to mount
the meter on a tripod. The tripod can be
regulated in height, which allows for an
ideal location for measurement.
|
 |
|
|
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
|
Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0 |
|
This page
in German in Italian in Spanish
in Croatian in French |