|
PCE-WP21 humidity tester for
building materials
to measure humidity in materials of
construction (concrete,
etc.) |
|
The
PCE-WP21 humidity tester for building materials is used to measure humidity of
concrete. This humidity tester for building materials
use a measurement procedure works according to both
the dielectric constant principle or the high frequency
principle. To get accurate results with the humidity
tester for building materials, you will only need
to select the concrete type is going to be tested and
put the electrodes on the concrete surface.
Electromagnetic waves penetrate to a 50 mm depth, so the
measurement results will be the mean value calculated
within the 50 mm of surface. At this
link you will find
other humidity tester for building materials provided with interface, memory and
software for data to be transferred to a PC or a portable
computer.
|
|
-
Measuring depth of 50 mm approx.
- Results are showered in few
seconds.
- Any preparation is required.
- 3 positions LCD display.
- Direct and safe use in situ.
- Battery indicator.
See / Print user's manual
|
PCE-WP21
humidity tester for concrete
|
|
Technical specifications |
|
Measurement range |
1
...
8
%
absolute humidity |
|
Resolution |
0,1
% |
|
Accuracy |
±
0,7
% |
|
Measuring depth |
50 mm
approx. |
|
Indicator |
3 1/2
positions LCD display |
|
Housing |
plastic |
|
Power |
1
x 9 V block battery |
|
Dimensions |
165
x 80 x 30 mm |
|
Weight |
500
g |
Delivery contents
PCE-WP21 humidity tester for building
materials, a briefcase and
user's manual |
 |
 |
|
Here you will find an overview of all the
measuring instruments
available at PCE Group |
|
Contact:
Companies House England
Tursdale Business Park
Co. Durham - DH6 5PG
United Kingdom
Phone. +44 ( 0 ) 191 377 3398
Fax
+44
( 0 ) 191 377 3357 |
|
This page in
German
in Italian
in Spanish
in Croatian
in French
 .
|
