|
pH Meter
HI 9124
Water and
dust resistant, multifunctional pH meter,
(pH electrode included and temperature sensor) |
The HI 9124
pH meter is a hand meter controlled by a
very precise microprocessor with a water
resistant housing. The pH meter has a
big screen that apart from indicating
the temperature simultaneously, it shows
the help symbols. The base of the
calibration of the pH meter is
preprogrammed tampon solutions , which
allow a simple calibration.
The pH stainless
steel temperature sensor allows a
precise measurement of the temperature
and an automatic compensation, which
increases the accuracy of the pH value.
In order to protect the battery of the
pH meter, the function of automatic
disconnection can be activated.
- Water and dust resistant housing for pH
measurements in situ.
- Big screen ( pH and temperature values
shown siultaneously)
You will find information about the pH
value here: pH definition. If you are looking for
similar pH meter, click
here. Here in this link
you can find an overview of any type of
pH meter that you may need. |
|

|
|
|
|
Examples
of use for the PCE-889 infrared
thermometer |

The pH meter HI 9124 making a pH and
temperature measurement in meat. |

pH meter measuring
the pH of a pond. |
|
Technical
specifications |
|
Measurement
ranges |
-2,00 ... 16,00
pH / -20 ... +120,00 ºC
0 ... 13 pH / 0 ... 80 ºC con el electrodo
HI 1230B |
|
Resolution |
0,01 pH / 0,1 ºC |
|
Accuracy(a 20 ºC) |
±0,01 pH / ± 0,4
ºC |
|
CEM typical
variation |
±0,02 pH / ± 0,4
ºC |
|
Calibration |
automatic- 1 or
2 points through 5 tampon solutions |
|
Temperature
compensation |
automatic or
manual -20 ... +120 ºC |
|
HI 1230B
electrodes |
plastic, gel
filling, 1 m cable and BNC
connection |
|
HI 7662
Temperature sensor |
stainles steel,
1 m cable |
|
Power supply |
4 x 1,2 V AAA
battteries, accumulator (approx. 200 hours) |
|
Condiciones
ambientales |
0 ... +50 ºC /
100 % R.H.. |
|
Dimensions |
192 x 71,6 x 36
mm |
|
Weight |
425 g |
|
Delivery
content
1 x pH meter HI 9124, 1 x pH electrode HI 1230B,
1 x temperature sensor HI 7662, 4 x
accumulators, 1 x net component charger, 1 x
carrying case, 1 x
user manual |
|
Opctional
- Calibration set :
By default we sent our pH meters calibrated.
This allows to begin to work with them
without the necessity to carry out one
calibration previously. However, please take
into account that the electrodes are exposed
to deviation caused by the time. This
deviation is accelerated for example by
aging, high temperatures or other
environmental causes. In order to obtain
a high reproducibility and precision in the
values of measurement, a periodic
recalibration is necessary. For it usualy
pH4 and pH7 calibration tampon solutions are
used. We we sent them in small bottles or in
sachets (see image on the right). |
 |
 |
 |
|
Here you will find an overview of all
the
measuring instruments
available at PCE Instruments. |
|
Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0 |
|
This page in
German
in Italian
in Spanish
in Croatian
in French
 |