|
PCE-SF 2 Satellite finder and multimeter
satellite finder with sensitivity regulator
and multimeter to measure AC/DC current and
voltage, continuity test, resistance
measurement and diode test / heavy enclosure
/ analog and digital functions. |
|
The PCE-SF 2 mobile satellite finder with
regulator of sensitivity and multimeter with
many different functions. With the PCE-SF 2
satellite finder and multimeter you can
install both analog and digital satellite
receivers. Received level is indicated by a
scale with backlight. With the rotary button
sensitivity can be adjusted. Connect the LNB
socket of the PCE-SF 2 satellite finder and
multimeter to the LNB cable and then connect
the receiver connection to the receiver.
Find the desired satellite and direct the
parabolic antenna adjusting the sensitivity
very carefully. The PCE-SF 2 satellite
finder and multimeter is extremely sensitive
and it has a short response time. This fact
allows the user to find the satellite signal
even if the antenna is quickly moving. The PCE-SF 2
satellite finder and multimeter is suitable
for both private and professional sectors.
Here you
will find an overview of all the multimeters
available at PCE-Instruments.
|
|
 |
|
-
Easy to read 3/12 digits LCD display.
- HOLD function
- Battery indication
- Rubberized heavy enclosure
- Measures AC/DC current and voltage, resistance, continuity and diodes.
- Overload indicator
- CAT III 600 V / CAT II 1000 V
- Regulator of the satellite signal sensitivity. |
- The
multimeter integrates auto range
selection
and auto shut-off.
- Frequency range 0,95 - 2,3 GHz
View /
print user's manual of the PCE-SF 2
satellite finder / multimeter.
 |
|
Technical
specifications |
|
Multimeter |
|
Measurement
ranges |
DCV: 200 mV; 2 /
20 / 200 / 600 V
ACV: 2 / 20 / 200 / 600 V
DCA: 200 / 2000 µA; 20 / 200 mA
ACA: 200 / 2000 µA; 20 / 200 mA
Oh: 200 Ω; 2 / 20 / 200 kΩ; 20 /
20 MΩ |
|
Resolution |
DCV: 0,1 mV;
0,001 / 0,01 / 0,1 / 1 V
ACV: 0,1 mV; 0,001 / 0,01 / 0,1 / 1 V
DCA: 0,1 / 1 µA; 0,01 / 0,1 mA
ACA: 0,1 / 1 µA; 0,01 / 0,1 mA
Ohmios: 0,1 / 1 / 10 / 100 Ω; 1 / 10 kΩ |
|
Accuracy |
DCV: ±0,5 % of
the indication + 3 digits (up to
200 mV); ±1 % + 3 digits (above)
ACV: ±1 % of the indication + 5 digits
(up to
20 V); ±1,5 % + 10 digits (above)
DCA: ±1,5 % of the indication + 3 digits
(up to
2 mA); ±2 % + 3 digits (above)
ACA: ±1,8 % of the indication + 3 digits
(up to
2 mA); ±2,5 % + 8 digits (above)
Ohms:
±0,8 % of the indication + 5 digits (up to
200 Ω) ±1 % + 3 digits (above)
±1,2% of the indication + 3 digits (up to
200 kΩ)
±2 % of the indication + 5 digits (up to 2
kΩ);
±5 % + 8 digits (above) |
|
AC frequency
range |
50 Hz ... 60 Hz |
|
Maximum voltage
input |
600 V |
|
Diode test |
max. test current, 1 mA
Voltage without standard load 1,5 V |
|
Continuity test |
Acoustic signal
with resistance <150Ω |
|
Display |
3 1/2 digits LCD |
|
Overload
indicator |
LCD will display "OL" |
|
Polarity |
minus sign (-)
with negative polarity |
|
Battery low
indication |
"BAT"
symbol indicates the battery status. |
|
Input impedance |
>7,5 MΩ (VDC &
VAC) |
|
Auto shut-off |
15 minutes
(approx.) |
|
Power |
2 x 1,5
V AAA batteries |
|
Operating
temperature |
0 ... 40 ºC (32
... 104 ºF) |
|
Storage
temperature |
-10 ... 50 ºC (14
... 122 ºF) |
|
Standards |
IEC61010-1 CAT
III-600 V
II Contamination rate |
|
Satellite finder |
|
Frequency range |
0,95 - 2,3 GHz |
|
Sensitivity |
7 |
|
Power
|
DC 13-18 V |
|
General comments |
|
Weight |
308 g |
|
Dimensions
|
162 x 74,5 x 44
mm |
|
Examples of
use of the PCE-SF 2 satellite finder and
multimeter |
 |
 |
|
Delivery
contents
1 x
lPCE-SF 2 satellite finder / multimeter, 1 x
test cable and user's manual |
 |
 |
|
Here you will find an overview of
all the
measuring
instruments
available at PCE Instruments. |
Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0 |
|
This page in
German
in Italian
in Spanish
in Croatian
in French
. |