PCE-UT232 Single-Phase Analyser
Single-phase analyser for measuring power in real time, up to 3 phases,
with memory, USB port and software

The PCE-UT232 Single-phase analyser is a multifunctional device. The Single-phase analyser covers almost all your needs. It can measure power from one to three phases like an active energy counter up to 9,999kWh. To minimise the amount of interference created by engineers in the operation of machines, a test device is required that can measure voltage, current and power. This Single-phase analyser is ideal for performing all of these measurements. Its internal circuitry, adapted to the most advanced technology, guarantees a quick and accurate analysis of the different factors of power, to allow for a repair to made of a potential problem. Readings obtained by the device can be sent to a computer to be processed. The Single-phase analyser comes with everything that you will need to use the device to its full capabilities. Here you will see a triphasic power meter with memory and software. This link shows an overview of each Single-phase analyser we have available.

PCE-UT232 Single-phase analyser

The Single-phase analyser has the following characte-ristics and can take the following measurements:

- Power measurement:

• Active power (kW)
• Apparent power (kVA)
• Reactive power (kVAR)
• Power factor (cos φ)
• Phase angle
• Integrator for active energy (kWh)

- Multimeter measurements:

• Effective real value / voltage
• Effective real value / current
• Frequency
• Temperature

- Memory for 99 readings
- Memory for minimum, maximum values and
  data hold
- Internal calibration mode
- Battery level indicator
- Automatic range select

The Single-phase analyser for measurements of 0.0 to 600kW / 0.0 to 1000A. The large backlit display shows several readings simultaneously.

Measuring with the PCE-UT232 Single-phase analyser

Measuring with the PCE-UT232 Single-phase analyser with 1 phase and 2 conductors

Measuring with the PCE-UT232 Single-phase analyser with 3 phases and 3 conductors

Measuring with the PCE-UT232 Single-phase analyser with 3 phases and 4 conductors

Technical specifications

Power (AC/TRMS)

20/100/300/600V, ±1.2% +5 digits

Current (AC/TRMS)

40/100/400/1,000A, ±2.0% +5 digits

Active power measurement

0.01kW to 600kW; ±3.0% +5 digits

Apparent power measurement

0.01kVA to 600kVA; ±3.0% +5 digits

Reactive power measurement

0.01 kVAr to 600 kVAr; ±4.0% +5 digits

Active energy (Kh counter)

1 to 9,999kWh, ±3.0% +2 digits

Power factor (cos φ)

0.3 to 1.00 inductive and capacitive; ±0.02 +2 digits

Phase angle

0 to 360º; ±1.0º

Frequency

20 to 500Hz

Temperature

-50 to 1300ºC; -58 to 2372ºF

Memory

99 readings

Display

9999 with graphic bars and backlight

Power

4 batteries (1.5V)

Dimensions (width x height x depth)

112 x 39 x 303mm

Weight

601g

Contents

PCE-UT232 Single-phase analyser

4 test cables

4 alligator clips

USB interface

software

carrying case

user's manual

Optional accessories
The ISO laboratory calibration includes a certificate to meet with internal ISO quality control. The customer details also appear in the calibration documentation.

Below you will find an overview of the different product groups of measuring instruments