PCE-VR Venturi Tube
Venturi tube to measure air flow in m³/h in pipelines and ventilation ducts /
flow meter up to a max. of  10.000 m³/h

The PCE-VR venturi tube is an air flow meter to measure air flow in pipelines and ventilation ducts. The PCE-VR venturi tube is very easy to handle thanks to its enclosure made of propylene. The PCE-VR venturi tube meets the DIN EN ISO 5167 and the ISA 1932 standards. The flow course (which is an important factor in the measurement) is reached by means of the special procedure of the thermoplastic material deformation. The PCE-VR venturi tube has a high flow accuracy due to the fact that the connection flange is optimally centered to allow for a quick installation in a pipeline. Thanks to its extremely smooth surface, the PCE-VR venturi tube has very good flow conditions. The venturi measuring principle is used to measure the gas flow rate. The minimum pressure value is located in the narrowest cross section of the venturi tube so the air flow velocity will be higher at this point. If you would like more information about all the flow meters available at PCE-Group, please click here. 

- Quick reading capacity m³/h

- Long version

- Version with flange

- Maximum pressure of installation 1.5 kg/cm² = 1,5 bar

- Optional factory calibration

View or print user's manual of the
 PCE-VR venturi tube

 

PCE-VR venturi tube

Technical specifications

Measurement range

20 ... 10,000 m³/h

Accuracy

±2 %

Reading capacity

depends on the model

Versions

with flange / with sleeve

Enclosure

polypropylene 

Colour

Operating temperature

0 ... +80  ºC

Standard

DIN EN ISO 5167 / ISA 1932

Versions

Use of the PCE-VR venturi tube

Here you can see the PCE-VR
venturi tube installed in a pipeline. 

Here you can see the PCE-VR
venturi tube in a ventilation duct.

PCE-VR venturi tube with sleeve

Here you can see a sketch of the
PCE-VR venturi tube with sleeve.

PCE-VR venturi tube with flange

Here you can see a sketch of the
PCE-VR venturi tube with flange.

Delivery contents

1 x PCE-VR venturi tube with indicator in m³/h

- ISO Calibration certificate
For companies that wish to include the PCE-VR venturi tube in their set of quality control tools. This factory calibration includes a laboratory calibration and a certificate with all the measurement values.

Here you will find all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian in French in Hungarian

in Turkish in Polish in Russian in Dutch in Portuguese in Portuguese

Below you will find an overview of the different product groups of measuring instruments