PCE-VT 2000 Vibration analyzer
vibration analyzer to measure vibration in machines and installations

The PCE-VT 2000 vibration analyzer was designed for the predictive maintenance of machines and installations. Owing to two important measurement parameters this vibration analyzer can measure vibration with high accuracy. The vibration analyzer is an excellent instrument to quickly determine the state of bearings and gears. Hence, the technician can detect the state of the machines on-site. The vibration analyzer is very easy to use. This instrument is mainly used to check vibrations in machines and installations through the vibration displacement. At the following link you can find an overview of the vibration analyzers that best suit your needs:

- To detect equilibrium departure quickly

- Powered by batteries

- Wide frequency range

- For the preventive maintenance of machines

- Easy to handle

- Integrated probe

- Compact housing

- Comparison of bearings

- Hold function

See / Print user’s manual

Classification of the measurement results (according to the ISO 2372 standard)

Observation (the different classes are referred to):
Class I (small engines up to 15 kW), class II (medium household appliances up to 75 kW), 
class III (big household appliances) and 
class IV (big engines / oscillating stator).
The measurement results are obtained from at least 3 measurements.

Technical Specifications

Acceleration

0.5 ... 199.9 m/s₂

0.05 ... 20.39 g

2 ... 656 ft/s₂

Speed

0.5 ... 199.9 mm/s

0.05 ... 19.99 cm/s

0.02 ... 7.87 inch/s

Resolution

Acceleration

0.1 mm/s2

0.01 gf

0.1 ft/s2

Speed

0.1 mm/s

0.01 cm/s

0.01 inch/s

Frequency of Range (for all the parameters)

±5%

Frequency Range

10 Hz ... 1 kHz

Display

LCD, 20 x 28 mm

Battery

4 x 1.5 AAA batteries

Operational Temperature Conditions

0 ... 50º C / <80% H.r.

Repeat Rate

1 second

Dimensions

175 x 40 x 132 mm

Weight

240 g

Images of the PCE-VT 200 vibration analyzer

Here you see a vibration analyzer testing a machine.

Here you see the PVE-VT 2000 vibration analyzer testing an engine.

This image shows the vibration analyzer testing a fixing drilling machine.

The vibration analyzer with its additional devices.

Delivery contents
1 x  PCE-VT 2000 vibration analyzer, 1 x carrying case, 1 x 30 mm needle, 1 x magnetic base, 4 x batteries and user’s manual.

Options

Optional accessories
ISO 9000 calibration certificate
For every company that wishes to incorporate this vibration analyzer into their internal quality control department or for annual recalibrations.
This certificate meets the DIN ISO standard and contains a certificate with the values used for calibration. It also contains details for the company that owns the device.

Here you will find all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian or in French