Home   Data protection Gen. Terms Verifications Service Calibrations Contact Details
 

     

  Laboratory Equipment Measuring Instruments Control Systems Security Equipment Scales and Balances



Information:

- Contact us
- Guarantee
- Calibration
- Legal advice

Other instruments:

- Control systems

- Measures

- Scales
 



Air flow meter

Accurate
scales

Anemometers

Multimeters

Force 
Gauges
 

Handheld
Tachometers

Coating
thickness
meters

Data loggers

Thermo
Hygrometers
Balanza de bolsillo HC-100AS
Crane
scales

Cup vane
anemometer

Thermometers 

Current detector

Thermal
cameras

Distance meter
Balanza contadora
Humidity content
Scales

Earth meters

Kitchen
scales

Electronic
stethoscope

Laboratory
Scales

Gas analyser

Laboratory
scales                    

Gas detector for refrigerants  

Multifunction
scales

Humidity
indicators

Packaging Scale

Humidity indicator
Balanza de precisión
Pallet balances

Infrared
thermometers

Pallet truck
scales

Insulation meter
Balanza de suelo
Paper Scale



Floor scales


Platform scales

Tester for fuel 

Pocket
scales

Hanging
Scales
Báscula pesa-ejes para coches
Postal scales

Oscilloscope 

Scale for
analysis

Microscopes

Scales for
transit

Microscopes
USB
 

Tabletop
scales

Noise meters

Tabletop Scale

Power
analyzer
 

Air flow
transducers
Caudalímetro para líquidos
Power and
harmonics
analyser

Digital
indicators

Radiation
analysers

Display
systems

Radio frequency
meter

Logic
modules

Rotation
meter

Signal
converters

Videoscopes 

Temperature
transducers
Videoscopio
Voltmeter

Temperature sensors

Weather
stations

Vibration
transducers

Packaging Balance with Verification PCE-PM C series 
(
Class III)
 
Solid and affordable packaging balance with verification, RS 232 interface, directly used in combination with DHL or GLS software for sending out parcels via the integrated interface, software kit optional

The packaging balance PCE-PM ... C is a verifiable and solid balance at an affordable price. The verification of the packaging balance PCE-PM ... C is carried out by the organization which qualifies  in calibration according to the trade class M III. The packaging balance PCE-PM ... C has a solid lacquered steel base and a lacquered steel platform covered with plastic. The packaging balance PCE-PM ... C comes with wide height control feet to be placed properly. The packaging balance PCE-PM ... C terminal is placed on a support which is positioned on a suitable height and it is firmly mounted in the industial balance. To ensure a good readability, it is possible to change the position of the display. The main functions of the packaging balance PCE-PM ... C are the following: auto tare function for a correct initial weight, piece counting function to detect quickly and with accuracy objects of the same weight, RS-232 to connect it to a printer or to a PC or portable computer for data logging function (optional software). The standard version allows the connection with the GLS and DHL software to a printer or PC. Other functions are: a 4-20 mA analogue output and  0-10 V analogue output, date and time, adjustment of limit values, calculation of the percentage, indication of the maximum weight, anti-shock filter and many others (other below).
The packaging balance PCE-PM ... C comes with CE certification. It meets all the metrological requirements and it can be used in those companies where a verification is not needed. There is an optional ISO certificate available. The optional ISO calibration certifies the recovery of the measurement values according to the national normal pattern. This
link shows an overview of the available scales and balances which will meet your requirements.

Packaging balance with verification PCE-PM ... C with verification, solid and affordable, RS 232 interface.
Packaging balance with verification PCE-PM ...C series

- Pieces counting function with reference pieces counting of 5 or 50 pieces.

- Tare in all the ranges

- 4 Level feet

- Bubble spirit level to adjust the balance

- Quick response time

- Steel platform covered with plastic.

- Solid lacquered steel base

- RS 232 interface

- Legal for trade verification class M III as optional

- ISO Calibration as optional (to meet DIN ISO 9000 standard) 

 - Additional special functions (ex, 4-20 mA analogue output)

Can be directly used with shipping software:
The software of the Packaging balance with verification PCE-PM ... C can be used with GLS.      The software of the Packaging balance with verification PCE-PM ... C can be used with DHL.   

Pacakaging balance with a verification PCE-PM...C series: Display

View or print user manual of the
packaging balance PCE-PM ...
C series 
View or print user manual of the packaging balance PCE-PM ... C series.

Packaging balance with verification PCE-PM ... C with RS-232 interface            Packaging balance with verification PCE-PM ... C: parts counting. 

Packaging balance with verification PCE-PM ... C: full tare            Packaging balance with verification PCE-PM ... C with IP54 protection 

packaging balance PCE-PM ... C delivered with 230 V mains adaptor            packaging balance PCE-PM ... C: Class II verification 

Technical specifications

balance model

Weight range max.

[kg]

Readability 
d

[g]

Verification value

Min. weight
 

[g]

Net weight
approx.

[kg]

Weighing pan

[mm]

CE-PM 30C

30

10

10

200

12

400 x 500

PCE-PM 60C

60

20

20

400

12

400 x 500

PCE-PM 150C

150

50

50

1000

12

400 x 500

PCE-PM 300C

300

100

100

2000

12

400 x 500

Verification Class

III

Piece counting function

PCE-PM 30C

PCE-PM 60C

PCE-PM 150C

PCE-PM 300C

5 g

10 g 25 g 50 g

Overall dimensions

400 x 500 x 850-870 mm

Platform size

125 mm

Display

280 x 190 x 96 mm

Figures size

14 mm/LED

Interface

additional device

Response time

approx. 2 seconds

Operating temperature

-10 ... +40 ºC

Protection

IP 54

Power

~230 V 50 Hz 8 VA/= 12 V 850 mA

Delivery includes
1 x Packaging balance PCE-PM… C with display, support and user manual.

Special features of the packaging balance PCE-PM:

- Feature package 2 for the packaging balance PCE-PM:
The standard features of the verifiable packaging balance are the following: auto tare function, piece counting function, automatic data transference, setting of the RS-232 port and memory for the tare value. There are other features within the feature package 2:
- Anti-vibration filter (FIL)
- Filter to weigh animals (LOC)
- Maximum value indication (MAX)
- Sum of recipes (SUM)
- Increasing of the readability for  5 seconds (F/F)
- Percentage calculation (%)

- Dual balance:
In case you need a higher resolution while weighing low range objects, we can offer the dual balance. For instance, if you get the packaging balance for 60 kg and add the dual function of 30 kg, you will have a reading capacity from 10 g to 30 kg, and when it exceeds 30 kg, a reading capacity of  20 g.

- Dimensions of the balance:
If you need a larger weighing pan, we can offer the following verifiable packaging balance:                 Overall dimensions: 510 x 730 x 850-870 mm
Weighing pan dimensions: 500 x 600 x 150 mm
Weight: 25 kg

- Stainless steel platform
Additionally, we can provide the packaging balance with a high quality stainless steel platform resistant to abrasions.

- Printer:
The verifiable packaging balance can be connected to a thermal printer with adhesive labels. This device can be sent when the balance is ordered because it only needs a basic setting-up. The thermal printer PCE-BP 1 does not need any special configuration.

- Date and time:
If you wish to print weighing values with date and time, it is possible to provide the packaging balance with an internal clock.

- RS-232 port:
Our verifiable packaging balances come with a RS-232 port. In case you need to connect our packaging balance to a printer and a PC or portable computer at the same time, we recommend to order another RS-232 port to avoid overloading connections.

- 4-20 mA analogue output:
If you provide the verifiable packaging balance with an analogue output, you will be able to use it for control and monitoring works related to the weight. The verifiable packaging balance will display the weight in mA unit taking into account that the range will be always between 4 and 20 mA. 4 mA means 0 kg (no load). In case of voltage drop it can indicate the fail. 20 mA will be the maximum load. It can be connected to a control relay and used for mixturing.

-  0-10 V analogue output:

Although this is not as usual as the analogue output from  4 to 20 mA, it works and operates in the same way, except for the possibility of displaying a fail, 0 V will be 0 kg and the maximum load will be 10 V.

- Adjustment weight:
This function allows using the packaging balance as a control device in economical and easy way. There is a possibility to set the limit values, one high and the other low. Additionally, the packaging balance comes with a testing interface to be able to switch up to 3 circuits with the help of the limit values. The activation of the three circuits can be determined as a single or continuous pulse. This is important for the control of the visual and acoustic alarms. If the weight is below the limit value a yellow light will be on; if it is between the upper and below value a green light will be on and if the upper limit value is exceeded a red light will be on.

- Continuous load
Due to the high quality of verifiable packaging balance and its special continuous load function, it is possible to detect the current weight before and after turning on/off the verifiable packaging balance. You can use this function to control the proper level in a winery. Other features such as getting the defined limit values can also be used without any problem (see the above paragraphs).  

Additional components for the verified packaging balance:

- Buzzer
If your packaging balance has the limit values function, it is possible to set up an acoustic signal when the established limit value is exceeded.
The buzzer will sound approx. at 90 dB.

Verifiable packaging balance PCE-PM ... C: Buzzer

- Visual indicator:
With the visual indicator it is possible to display the established limit values to exclude any negligence. If the weight is below the limit value, a yellow light will be on; if it is between the upper and below value, a green light will be on and if the upper limit value is exceeded, a red light will be on.

Verifiable packaging balance PCE-PM...C: Visual indicator

Legal For Trade Verification (Class III)
The verification procedure includes laboratory
 calibration process and certification according  to
  the rules (legal for trade) of legislation
/ verification in Germany (based on the customer's
 postal code. The customer's name and address are included. They are accepted all over the world.

Verifiable packaging balance PCE-PM...C: Verification certificate

- ISO Calibration certificate

The calibration procedure includes laboratory calibration process and ISO certification. The customer's name and address are included. These certificates are comparable to NIST and UKAS certificates. They are accepted all over the world.

Verifiable packaging balance PCE-PM...C: ISO calibration certificate

- RS-232 cable
To use it with a printer and the corresponding software for sending the data directly to GLS, DHL or UPS software for sending out parcels.
 
The software of the Packaging balance with verification PCE-PM ... C can be used with GLS.       The software of the Packaging balance with verification PCE-PM ... C can be used with DHL.

Verifiable packaging balance PCE-PM...C:  cable

- Software Kit (PCE-SOFT-PM)
The kit includes a software for transferring the  weighing data to a PC or Portable and a RS-232-cable to transfer, register, analyse, edit and print weighing results. The transferred data can also be sent for further analysis, as for instance: sum up diverse values. In case your PC or Portable uses USB-Interfaces, you can use the adapter together with the standard RS-232 Cable.

Verifiable packaging balance PCE-PM...C: software

- USB adapter
In case your PC or Portable uses USB-Interfaces, you can use the adapter together with the standard RS-232 Cable. A small software (covering the actual drivers) is included. 
- Easy to install
- Plug and play available
- No interrupt needed (IRQ)

Verifiable packaging balance PCE-PM...C: USB adapter

- Thermal printer
The printer is used for direct output of weighing data. It will be delivered with RS-232-cable, a 230 V mains adapter and 1 roll of paper for the PCE-BP 1 printer.

  - Paper width: 11O mm
 

Verifiable packaging balance PCE-PM...C: Thermal printer

- Printer of labels
For adhesive labels. The printer is used for direct output of weighing results on adhesive labels. The printer is delivered with RS-232 and a 230 V mains adapter. The label width can be adjusted (max. 50 mm).

Verifiable packaging balance PCE-PM...C: Printer of labels

technical specifications for the Packaging balance PCE-PM C return to the home page packaging balance PCE-PM

Here you will find an overview of all the balances available in the offer of PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

This page in German the Packaging balance PCE-PM C in German in Italian Packaging balance PCE-PM C in italian in Spanish Packaging balance PCE-PM C in spanish in Croatian Packaging balance PCE-PM C in Croatian in French Packaging balance PCE-PM C in French in Hungarian Packaging balance PCE-PM C in Hungarian

in Turkish Packaging balance PCE-PM C in Turkish in Polish Packaging balance PCE-PM C in Polish in Russian Packaging balance PCE-PM C in Russian in Dutch Packaging balance PCE-PM C in Dutch in Portuguese Packaging balance PCE-PM in Portuguese in Portuguese  Packaging balance PCE-PM in Portuguese