PCE-PHD 1 pH meter
measures pH value, conductivity, oxygen, and temperature,
with memory and software
|
|
The PCE-PHD 1 pH meter is
really a device with multiple capabilities for
inspecting the quality of water. The portable pH meter
is used for testing the pH value of water, as well as
conductivity, oxygen and temperature. A three point
calibration, such as an automatic temperature
compensation, guarantees a high level of accuracy, this
includes with variable temperature measurements. The pH
meter comes with a pH sensor and a conductivity sensor
included. There are also other different sensors and a
software kit with an RS-232 cable available as
accessories. The software ad cable allow for data to be
transferred to a computer to be analyzed and documented.
An overview of all the pH
meters available from PCE Group are listed
here. |
-
Measures pH value
and conductivity
-
optional measuring
sensors available for oxygen and temperature
-
Memory for 16,000
readings with date and time stamp
-
Measurement quota can
be adjusted at intervals between 1 second up to 9
hours
-
RS-232 interface
-
Automatic temperature
compensation available with the optional temperature
sensor
-
software kit available
separately
-
Minimum, maximum and
data hold functions
-
batteries and user's
manual are included
-
optional REDOX
electrode
View or print the user's manual
|
PCE-PHD 1 pH meter
|
|

Here the optional software kit for the PCE-PHD 1 pH meter
can be seen. |
|
Technical specifications |
|
Measurement
ranges
pH value
conductivity
TDS
oxygen (optional)
temperature (optional) |
0.00 to 14.00 pH
0 to 200.0 µS/cm
0.2 to 2.000 mS/cm
2 to 20.00 mS/cm
20 to 200.0 mS/cm
0 to 132 ppm
132 to 1320 ppm
1320 to 13200 ppm
13200 to 132000 ppm
0 to 20.0 mg/l
0 to 60.0 ºC
|
|
Resolution
pH value
conductivity
TDS
oxygen (optional)
temperature (optional) |
0.01pH
0.1µS/cm
0.001mS/cm
0.01mS/cm
0.1mS/cm
0.1 ppm
1 ppm
10 ppm
100 ppm
0.1 mg/l
0.1 ºC |
|
Accuracy
pH value
conductivity
TDS
oxygen (optional)
temperature (optional) |
±0.02pH; + 2 digits
±0.02% of measurement range; + 1 digit
±0.02% of measurement range; + 1 digit
±0.4mg/l
±0.8ºC |
|
Calibration
pH value
conductivity
oxygen (optional) |
3 calibration points (pH4, pH7 y pH10)
with 1413 µS/cm
in the air |
|
Temperature
compensation |
automatic with
optional temperature sensor
(0 to 65ºC) or manual from 0 to 100ºC |
|
Power |
4 AA batteries (or
with optional mains adaptor) |
| Interface |
RS-232 |
|
Operating conditions |
0 to 50°C
/ <80% r.h. |
|
Dimensions |
203 x 76 x 38mm |
|
Weight |
365g with batteries |
|

Here you will find an optional conductivity electrode
available for the
PCE-PHD 1 pH meter. |

Here you will find an optional pH electrode available for
the
PCE-PHD 1 pH meter. |
Contents
PCE-PHD 1 pH meter, pH electrode, conductivity electrode,
4 batteries and user's manual |

Here you will find an optional temperature sensor available
for the
PCE-PHD 1 pH meter. |

Here you will find an optional oxygen sensor available
for the
PCE-PHD 1 pH meter. |
Optional accessories
- pH value calibration kit
- conductivity calibration kit
- oxygen electrode
- temperature sensor
- software kit
- mains adaptor to use the device without batteries |
 |
 |
|
Here you will find an overview of all the
measuring instruments available at PCE Group.
|
If you have any doubt, call our
technicians on:
Germany:
+49 (0)29 03 976 99-52
Italy:
+39 0583 975 114
Spain:
+34 967
543 548
|
|
This page in German
in Italian
in Spanish
in Croatian
in French
 |