IR Camera Flir B series
IR camera with resolution up to 240 x 180 pixels / extremely easy operation / written and spoken comments / touch screen LC display / acoustic and visual temperature alert / humidity and thermal bridge alert

The IR camera is the first choice for professional thermographs. The mobile IR cameras of the B series of Flir set new standards in ergonomics, weight and user-friendliness. User-friendliness is crucial: our engineers considered feedback of customers regarding comfort and functionality to develop extensive and innovative performance characteristics of IR camera Flir B series. Additionally, IR camera B series was especially built for use in the field of construction. The IR camera has functions like dew point and thermal bridge alert that facilitate the work for every building thermograph expert. Every IR camera of the Flir B series has an integrated digital camera with 3.1 megapixels. Thus, studies and inspections can be documented quicker and easier. With IR camera and FLIRBuildIR software it is possible to record image sequences and automatic assemble this single images to one big image. The images can be recorded vertical or horizontal or in combination of both. Radiometric 16 bit infrared video data can be transmitted via USB to a PC on that the software FLIR QuickPlot or FLIR ResearchIR are installed. Moreover, IR camera covers your visual image with an infrared image. According to chosen model is this image scalable, movable and variable in size. The alert for moisture indicates sections where danger of condensation exists. A thermal bridge alert points out insulation performance of buildings. Via entering of relevant values to the IR camera all section that do not meet expectations will be presented coloured. An overview of all thermal imaging cameras can be found here: IR cameras. If there are any questions about the IR Camera Flir B series have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all inspection cameras and all products in the field of measuring instruments, regulation and control and scales.

Sensitivity of camera
The thermic sensitivity of IR camera FLIR B series reaches from 70 mK up to 50 mK depending on camera model.

High-quality camera
All models of IR camera FLIR B series have an integrated digital camera with 3.1 megapixels. Thus, observations and inspections can be documented quicker and easier.

Panorama support (FLIR B250/B425)
Recordings of image sequences and automatic assemble of single images to one big image is possible with the FLIR BiuldIR software. Images can be recorded vertical or horizontal or in combination of both.

Measurement range
Temperature measurement area -20 °C until +350 °C (depending on camera model).

Exchangeable infrared lenses
IR camera B series has a standardized 25° lens and 6°, 15°, 45° and 90° optional.

Flexible interfaces
IR camera B series is equipped with video and USB output as well as exchangeable SD card as standard.

MPEG4 video
Creation of real and non-radiometric infrared MPEG4 video files.

Radiometric IR video streaming
Radiometric 16 bit infrared video data can be transmitted to a PC that has software FLIR QuickPlot or FLIR ResearchIR installed.

Thermal fusion
Combined real and infrared images for better analysis.

Picture-in-picture
Covers visual images with infrared images. Scalable, movable and variable in size (depending on chosen camera model).

Written and spoken comments
Written comments can be created based on a predefined list or via use of touch screen. A Headset for spoken comments can be connected.

Sketched comments (B250/B425)
Use touch screen of IR camera instead of paper and pen to add sketched comments. Spoken comments can be recorded via Bluetooth head set.

Storage of images
FLIR uses a standardized radiometric JPEG format that allows postprocessing and recording with FLIR record software that is based on Microsoft Word®.

Touch screen of IR camera
3.5 “LCD touch screen with pen that is easy to handle and set new standards with regard to interactivity and user comfort.

Acoustic and visual temperature alert
For easier and quicker inspections.

MeterLink^TM
with MeterLink technology of FLIR data that were determined with a multifunction humidity tester can be transmitted to IR camera via Bluetooth. MeterLink technology saves time and erases risk of possibly mistaken recordings or notes.

Copy to USB
Transmit stored images and reports from IR camera to a USB stick.

Instant report (B365/B425)
Reports can be created immediately in camera; reports can be transmitted to a USB stick afterwards.

Moisture and thermal bridge alert
The alert for moisture indicates sections where risk of condensation exists. Thermal bridge alert shows insulation performance of buildings. Through entering of relevant data in IR camera section that do not meet expectations will be presented coloured.

Functions depend on camera model; therefore please note technical specifications.

Technical specification of IR camera

Camera model

Flir B250 

Image performance

Thermic sensitivity / NETD

70 mK at 30°C

Infrared resolution 

240 x 180 pixels

Temperature area

-20 ... +120 °C

Zoom

1 until 2 times infinitely, digital zoom moving function included

Images modes

general

Thermal fusion

N/V

Picture-in-picture

scalable infrared area on real image

Differential temperature

N/V

Measuring function alert

N/V

Screening

N/V

Colour pallets

general + rainbow HC, blue red

Regular image storage

N/V

Panorama

for creation of panorama images with FLIR BuildIF software

Spoken comments

60 seconds

Image marking

on infrared or real image

Sketch

on touch sreen

Video recording of digital camera

N/V

Instant report

N/V

General 

Field of vision (FOV) / minimal focus distance

25° x 19° / 0.4 m

Spectral range

7.5 ... 13 µm

Geometric resolution (IFOV)

2.18 mRad at B250 - 1.36 mRad at B335, B 336, B425

Image refresh rate

90 Hz or 30 Hz

Focus

automatic or manual

Focal plane array (FPA)

microbolometer uncooling

Display

integrated 3.5" LCD touch screen, 320 x 240 pixels

Images modes

infrared image, real image, picture-in-picture, picture gallery

Point meter

5

Accuracy

± 2 °C or 2 % of reading

Area

5 rectangle sections with max / min / average value

Isotherm

recognition of high / low temperature / interval

Humidity alert

1 humidity alert dew point alert included

Thermal bridge alert

1 thermal bridge alert

Automatic recognition hot / cold sections

automatic measuring point marking (hot or cold) within chosen section

Correction emissivity

variable from 0.1 to 1.0 or selection from list with material

Measurement corrections

reflected temperature, transmission degree of optics and atmospheric transmission degree

Correction external optics / windows

automatic, based on entering of transmission degree of optics / window and temperature

Colour pallets

black-white, iron, rainbow (rainbow HC and blue-red: B250, B365 and B425)

Operation elements for basic adjustments

local adjustment of units, language, date and time format, automatic shut-down, brightness of display

Card type

SD card

File format

standard JPEG - 14 bit measuring data included

Modes

IR / real images, simultaneous storing of IR and real images 

Text

text of predefined list or software - keyboard on touch screen

MeterLink

connection of clamp meter or humidity tester via bluetooth

Installed camera

3.1 megapixels (2048 x 1536 pixels) and lightning

Laser

semiconductor AlGalnP diode laser, class II

Laser marking

position automatically shown on infrared image

Radiometric IR video streaming

fully dynamic on PC via USB

Non-radiometric IR video streaming

MPEG-4 on PC via USB

Battery duration

lithium ion rechargeable, on-site exchangeable

Charger system

4 hours

Power supply operation

in camera, power adapter, charger with 2 trays or 12 V on a car

Energy management

power adapter, 100-240 V AC, 50/60 Hz

Adapter voltage

automatic shut-down (selection via user)

Operation temperature

-15 ... 50 °C

Storage temperature

-40 ... 70 °C

Moisture storage and operation

IEC 68-2-30 / 24 h 95 % moisture +25 °C until +40°C

Shocks

25 G, IEC 60068-2-29

Oscillations

2 G, IEC 60068-2-6

Protection class case

IP 54 IEC 60529

USB-A

connection external USB device (copy / save on USB stick)

USB-mini-B

data transmission to and from PC / streaming MPEG-4

Composite video

PAL or NTSC

Connection for head set

yes

Dimensions

106 x 201 x 125 mm

Weight

880 g

Examples of use for IR camera Flir B series

Delivery content
1x IR camera with lens FLIR B250, FLIR B335, FLIR B365 or FLIR B425
1x robust transportation case
1x battery
1x power adapter
1x Bluetooth USB micro adapter (only B425)
1x calibration certificate
1x CD-ROM with FLIR QuickReportTM PC software
1x Head set (Bluetooth head set; only B425)
1x power cable
1x memory card with adapter
1x printed brief manual
1x sunshade
1x USB cable
1x CD-ROM with user documentation
1x video cable
1x guarantee extension card

Additional
-IR inspection window Flir IRW series

Here you can find further similar products regarding 'IR cameras':

- IR camera PCE-TC 2
  (- 10 ... + 300 °C, 47 x 47 pixels, picture-in-picture, for maintenance)

- IR camera PCE-TC 3
  (- 10 ... + 250 °C, 160 x 120 pixels, professional camera with SD memory card and software)

- IR camera PCE-TC 4
  (- 10 ... + 900 °C, 160 x 120 pixels, professional high temperature camera with software)

- IR camera PCE-TC 6
  (-10 ... + 250 °C, 160 x 120 pixels, wide range camera with tele-lens)

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments