DM-9960 Multimeter
for all kind of magnitudes, big display with bar graph, very fast Peak measurements > 1 ms, frequency up to 40 MHz, CATIII 1000 V standard

The DM-9960 Multimeter has both manual and automatic range selection as well as a dual indicator with a numerical value up to 3999 and an analogue bar graph with 40 segments where the measurement values can be easily read and changes can be quickly detected. This multimeter has a range up to a maximum of 40 MHz and can offer you innovative possibilities for conventional measurements, for Peak measurements of impulse input of >1ms as well as for highly accurate frequency measurements up to 40 MHz. The DM-9960 Multimeter comes with a complete input protection and meets the CAT III 1000 V standard. The different functions are selected easily by pressing the corresponding keys. The multimeter has an automatic range selection for DC voltage, AC voltage, DC current, AC current, Ohms, measurement of diodes, transit, capacitance, frequency and temperature. Other multimeter models with graphics, interface and software (multimeter, oscilloscope, logical analyser, etc.) can be seen here.

- Analogue graph bar with 40 segments

- Battery indicator

- Measurement value, minimum/maximum value     and maintenance of the peak value

- Measurement of the relative value

- Diode test

- Transit test

- Automatic range selection

- Automatic shut-off

- Security: IEC-1010-1; CAT III 1000 V  

 DM-9960 Multimeter

View or print user manual

Delivery content
1 x DM-9960 Multimeter, testing cables, 2 x micro batteries and user manual.

- ISO calibration certificate
For companies that wish to include this device in their set of internal testing tools or for annual recalibrations. The ISO certificate includes a laboratory calibration and a control document with all the measurement values. The ISO calibration certificate can be done in voltage (AC/DC) or in current (AC/DC).

- Amp clamp adaptor
Adaptor for indirect measurement of current up to 1000 A without interrupting the cable.
   - Range: 200/1000A DC/AC
   - Accuracy: ±1.5/2%
   - A DC zero reset
   Dimensions: 190 x 64 x 33 mm
   Maximum diameter of cable: 33.5 mm

 - Revolution adaptor
Adaptor with revolutions sensor and 1 m cable.
For optical measurement of revolution between 100 and 20,000 RPM in two ranges.
   - 0.1 mV DC/1 RPM   (range 1)
   - 0.1 mV DC/10 RPM (range 2)
   - Dimensions: 190 x 73 x 37 mm

 - Pressure adaptor
Adaptor with pressure sensor and 1 m cable.
For absolute measurement of pressure between 3.5 and 3500 kPa.
   - Accuracy: ±1% (up to 1700 kPa); ±2% (up to
     2400 kPa) and ±5% (up to 3500 kPa)
   - Resolution: 0.1/1 kPa
   - Dimensions: 100 x 50 x 25 mm; 1/4" sensor.

- Humidity adaptor
Adaptor with humidity sensor with handle and 1 m cable.
   - Range: 10 to 95% r.h.
   - Accuracy: ±3% r.h.
   - Resolution: 0.1% r.h.
   - Dimensions: 100 x 50 x 25 mm

 - Light adaptor
  Adaptor with light sensor and 1 m cable.
   - Three ranges: 0 to 2000/0 to 20,000 and 0 to       50,000 lux
   - Accuracy: ±5%
   - Resolution: 1, 10, 100 lux
   - Dimensions: 100 x 50 x 25 mm

 - Air velocity adaptor
 Adaptor with an air velocity sensor and 1 m cable.
   - Range: 0.2 to 30 m/s;
   - Accuracy: ±2%
   - Resolution: 0.1 (m/s; km/h; knots)
   - Dimensions: 100 x 50 x 25 mm.

 - Sound adaptor
Adaptor with sound sensor and 1m cable. A-weighting; can be externally calibrated (PCE-SC 41 calibrator)
   - Ranges: 30 to 130 dB (in three ranges)
   - Accuracy: ±1.5 dB (IEC 651 class II)
   - Dimensions: 107 x 53 x 29 mm

- EMF adaptor
Adaptor with EMF sensor and 1 m cable.
   - Range: 0 to 20 microTesla/200 milliGauss
   - Accuracy: ±4%
   - Resolution: 0.1 µTesla/1 milliGauss
   - Bandwidth: 30 to 300 Hz
   - Dimensions: 100 x 50 x 25 mm

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments