ATC HI 9835 salt meter
waterproof salt meter to measure conductivity, TDS, salt content and temperature

With the ATC HI 9835 salt meter you can measure conductivity in µS/cm or in  ppm (mg/l TDS measurement field), salt content (NaCl) in % and temperature. With the ATC HI 9835 salt meter all measurement values can be represented with automatic or manual temperature compensation. The ATC HI 9835 salt meter can have a temperature coefficient between 0,0 y 6,0%  and the TDS can be regulated between 0,80 (F1) and 0,40 (F2). The ATC HI 9835 salt meter is composed by a waterproof body which can be both used in the countryside or in the laboratory. At the following link you will find an overview of the salt meter that best suits your needs.

The ATC HI 9835 salt meter has a large and easy-to-read L-display which explains the calibration procedure by means of very easy symbols.
Apart from conductivity values, the temperature of the solution is also displayed. The ATC HI 9835 salt meter has available an auto shut-off function after 10 minutes or non-use.

- rubber coated buttons

- waterproof

- replaceable electrode

- large display

- good quality

Technical specifications

Measurement fields
     Temperature

     EC conductivity



     TDS salt content



     NaCl

0,0...+ 60 °C

0.00...29.99 µS/cm;   30.0...299.9 µS/cm
300...2,999 µS/cm;  3.00...29.99 mS/cm
30.0...200.0 mS/cm;  200.0...500.0 mS/cm

0,00...14,99 ppm (mg/l); 15,0...149.9 ppm (mg/l)
150...1,499 ppm (mg/l);   1.50...14.99 ppt (g/l)
15.0...100.0 ppt (g/l);   100.0...400.0 ppt (g/l)

0,0 ... 400,0 %

Resolution
     Temperature

    EC conductivity
     

     TDS salt content

     NaCl

0,1 °C

0.01 µS/cm; 0.1 µS/cm; 1 µS/cm;
0.01 mS/cm;   0.1 mS/cm

0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt; 0.1 ppt

0.1 %

Accuracy (at 20°C)
     Temperature
     EC conductivity
     TDS salt content
     NaCl

± 0.4 °CC
+- 1 % of the indicated value
+- 1 % of the indicated value
+- 1 % of the indicated value

Calibration
      Temperature
     EC conductivity
     TDS factor
     NaCl

2 points calibration
1 point (with 6 registered buffers)
adjustable between 0.40 and 0.80
1 point with optional solution (HI 7037)

Temperature compensation

automatic or manual 0...60 °C

Electrode

HI 76309; for rings probe with built-in thermal sensor connected to a 1m cable

Power supply 

4 x AA  1.5 v batteries (150 h)

Auto shut-off

after 5 min.  (it can be disabled)

Operating conditions

0...50 °C 100 % HR

Dimensions

196 x 80 x 60 mm

Weight

500 g

Delivery contents
1 x  HI 9835 salt meter, 1 x HI 76309 conductivity probe, 4 x batteries and user's manual.

Options
- Calibration solutions
- 230 v adapter
- Replacement conductivity probe
- Carrying case

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments