Electronic moisture meter hydromette BL compact
Electronic moisture meter for different wood types as well as soft construction and insulation materials/ direct display of wood and construction moisture in weight %/ 4- steps wood type correction/ characteristic lines for 3 construction materials and 2 insulation materials

The hydromette BL compact is an electronic moisture meter for different wood types as well as soft construction and insulation material. The measuring tips are to press into the respective test material, thus the electronic moisture meter hydromette BL compact captures the moisture of timber, chip boards, veneering and wood fibre material (up to 25 mm thickness) as well as common mixed and gypsum plaster. After completing the measurement, the minimal and maximal values per construction material can be retrieved from the data storage. Every electronic moisture meter hydromette BL compact is delivered completed with battery, substitute tips, protection cover and synthetic box. For further information about the electronic moisture meter hydromette BL compact, please read the following technical data or call our Hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. You can also reach us through our contact form. Our engineers and technicians will gladly advise you regarding the inside humidity meter hydromette BL compact or any product in terms of regulation and control, or scales and balances of PCE Instruments.

- Electronic moisture meter in pocket format 
- for quick single and serial measurement
- moisture in weight %  
- 3-line LC display, resolution: 0.1 %/ 0.1 °C
- 4-steps wood type correction

- Min, max and hold function for measured values
- Display of devices temperature 
- Display of devices surrounding temperature
- Automatic device switch-off

Technical specification of electronic moisture meter hydromette BL compact

Wood moisture

6…25 % (absolute dry mass)

Construction moisture

0.4…6.0 weight%

Resolution

0.1 %

Display

3-lines display

Response time

< 2 sec.

Storage conditions

+5 ... +40 °C
-10…+60 °C (short-term)

Operation conditions

0…+50 °C
-10…+60 °C (short-term)

Applicable types

Type 6LR61/ type 6F22

Dimensions

200 x 50 x 30 mm

Weight

170 g

Delivery content building moisture indicator hydromette BL compact

1 x building moisture indicator hydromette BL compact, 1 x battery, 1 x plastic cap, 1 x plastic box, 1 x spare needles, 1 x instruction manual

Additional equipment building moisture indicator hydromette BL compact

Electrode tip plug compact HW 175 (reference number 14351)
non-insolated, to measure insulation material, wood wool, etc. Only combined with the devices hydromette BL compact and compact S, tip length: 175 mm

Electrode tip plug compact Bi 175 (reference number 14352)
Insulated at stem, for measurement of insulation material, only combines with hydromette BL compact and BL compact S, tip length 175 mm

Standby case VIII
(Reference number 15058)
For two devices of GANN blue product series without further equipment

Synthetic box
(Reference number 15099)
For 1 device of GANN blue product series without equipment (substitute box)

Electrode tips without insulation, 20 mm
For hydromette COMPACT, COMPACT S, H25 as well as for the conversion set M20-DS16, 20 mm length (max. depth of impression approx. 10 mm) packing= 100 pieces

In the following, you will find more hydraulic force meter:

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales