Conductivity Controller Smart 96-LF
Conductivity controller to monitor conductivity and temperature / 
large measuring range of 0…400 mS / 2 potential-free relay contacts / 
clearly legible display

The conductivity controller is a classical controller implicating that the conductivity controller is universally applicable. The favoured thresholds can be programmed via the keys of the conductivity controller that is frontal from the device. Furthermore the clearly legible LC display is mounted at the front of the conductivity controller, allowing seeing the current measuring value of the conductivity controller at any time. Thus the conductivity controller is ideally applicable and operable in industrial fields. The electrode and sensor connections of the conductivity controller are applied at the back of the controller and are to plug in or to screw. The conductivity controller can be applied in fields of electroplating, the control of fresh and sewage water or sewage neutralisation. Due to its almost diminutive dimensions the conductivity controller fits in any switch panel. For further information about the conductivity controller Smart 96-LF, please read the following technical data or call our Hotline: +44 (0)2380 987030. You can also reach us through our contact form. Our engineers and technicians will gladly advise you regarding the conductivity controller Smart 96-LF or any product in terms of regulation and control, or scales and balances of PCE Instruments.

- Small dimensions, though robust enclosure
- Freely adjustable
- 2 potential-free relay contacts

- Large measuring range
- Conductivity electrode optional
- Clearly legible display

Technical data

Measuring ranges
arises from the adjusted channel (ZK)
ZK 1.0:
Special measuring ranges:
ZK 1S:
ZK 5S:

0 ... 200 µS / 400 µS / 2000 µS / 4000 µS / 20 mS / 40 mS

0…200 mS
0…1000 mS

Resolution

10 digits

Accuracy
Common measuring ranges:
Special measuring ranges:

±1.5 % from real value
±2.5 % from real value

Limit switch (GW)

adjustable, 2 or 3 levels

Switch characteristics

falling or rising edge or negative impulse

Contact type

Permanent or wiping contact

Switching delay

0…9999 sec

Switching hysteresis

5…500 digit

Monitoring (alarm)

Adjustable, 3 levels

Signals

optic and acoustic

Time delay

0.1…999.9 min

Reset

manually resettable

Proportional impulse length controller (PRI)

Integral action

in 3 steps shiftable

Periodic time

4 … 120 sec

Proportional impulse frequency controller (PRF)

Integral action

in 3 steps shiftable

Pulse repetition frequency

0.5 … 3 Hz

Impulse length

170 ms, fixed

Operational voltage

230 V AC / 50/60 Hz, (12 V or 24 V optional)

Power input

<6 VA

Surrounding conditions

0…+50 °C, <50% RH

Electrical safety

according to EN 61 010

Protection class           

1

Protection type

according to EN 60 529, frontal IP 65

Electromagnetic compatibility

According to NAMUR- recommendation NE21, EN 50 081 part 1, EN 50 082 part 2

Enclosure

Embedding enclosure according to DIN 43 700, flame-retardant Noryl

Dimensions
Front 
Front plate excerpt
Casing depth

48 x 96 mm
44 x 90.5 mm
120 mm

Connections

plug-screw-type terminal

Weight

450 g

Delivery content:

1 x conductivity controller Smart 96-LF, 1 x instruction manual

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

This page in German in Italian in Spanish in Croatian in French in Hungarian  
in Turkish in Polish in Russian in Dutch in Portuguese in Portuguese

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales