|
|
|
|
Platforms Balances
|
|
With our class III platforms balances you will be able to weigh loads directly from the loading ramp.  By using platforms balances you will save time, shorten the path with full weight, and you will also reduce the number of employees working with weight. We have two models of platforms balances: balances to cross over the loads and balances with are brought into the load (U size). Official calibrations are required for some platforms balances, for instance for balances for weighing Euro weight. Terminals for usage can be installed in many different places: on the table, on a wall or on a tripod. Installation plans are necessary for 9026, 2813 and 2814 models, so we recommend you to read installation plans and make the necessary arrangements to prepare the place where platforms balances are going to operate before delivering them. If you don't find the platforms balances you are looking for, please contact us and we will help you find the best solution which suits your needs: +44 ( 0 ) 2380 98703 0. Our technical staff will advise you regarding our balances. Our engineers and technicians will be happy to help you with the platforms balances, and of course, with the other products in the field of regulation and control, and measuring instruments.
Technical specifications for our Platforms Balances can be found at the following links:
|
|
- PCE-EPS 40 series Platforms Balances
(platforms balances with weight range up to 40 kg, readability of 10 g, battery power and network component)
|
 |
|
- PCE-PB series Platforms Balances
(platforms balances with weight range between 60 kg and 150 kg, RS-232 interface)
|
 |
|
- PCE-HPS series Platforms Balances
(economic platforms balances with weight range up to 60 kg, rechargeable, RS-232)
|
 |
|
- PCE-TS series Platforms Balances 
(platforms balances with weigh range up to 60 or 150 kg, with optional software)
|
 |
|
- PCE-PM C series Platforms Balances
(multifunctional platforms balances with weight range up to 300 kg, resolution of 10 g)
|
 |
|
- PCE-PS...XL series Platforms Balances
(multifunctional platforms balances with weight range up to 75 kg, powered by accumulator)
|
 |
|
- PCE-SST series Platforms Balances
(platforms balances made of IP 66/IP 65 stell, water resistant, with weight range up to 150 kg)
|
 |
|
- PCE-PM SST series Platforms Balances
(platforms balances made of IP 67/IP 68 steel, water resistant, with weight range up to 60 kg)
|
 |
|
- PCE-BDM series Platforms Balances
(platforms balances with weight range up to 10,000 g, readability 0.2 g; RS-232)
|
 |
|
- PCE-PCS series Platforms Balances
(Piece count function, weight range: 6 Kg/30 Kg; Readability: 0.1 g/0.5 g; RS-232)
|
 |
|
- PCE-BM C series Platforms Balances
(piece counting function, verifiable as M III, weight range up to 30 kg, varification value from 2 g, triple display, limit value)
|
 |
|
- PCE-RS series Platforms Balances
(verified platforms balances with weight range of 500 Kg and 1500 kg)
|
 |
|
- PCE-EP E series Platforms Balances
(two models of platforms balances with weight range up to 3000 kg and 5000 kg)
|
 |
|
- PCE-TP E series Platforms Balances
(verified platforms balances, without ramp, with weight up to 6000 kg, optional indicator and interface)
|
 |
|
- PCE-TP F series Platforms Balances
(installation on the floor, with weight range up to 6000 kg and readability from 0.5 kg, RS-232, optional floor frame)
|
 |
|
- PCE-TP 1500 series Platforms Balances
(verified platforms balances to access vehicles and loading ramp)
|
|
|
- PCE-TP...SST series Platforms Balances
(calibrated platforms balances made of stainless steel, with weight range up to 2000 kg, resolution of 0.2 kg, screen)
|
 |
|
- PCE-AS 1500 series Platforms Balances
(platforms balances with weight range up to 1500 kg, 0.5 kg, RS-232, four gates)
|
 |
|
- PCE-WWSB8 series Platforms Balances
(platforms balances with two platforms up to 8000 kg, including printers and screen resolution of 5 kg)
|
 |
|
Verified and calibrated Platforms Balances are available in our offer. Calibration or verification can be made when they are ordered (for extra price) or they can be verified in your local authorized verification centre. Both regular calibrations of platforms balances (to meet the internal control of the ISO standard) and later verifications have to be done in situ. If you are not sure whether a verification for platforms balances is required or whether the version with calibration certificate is enough, please read carefully the following information. In order to meet the CEE standard all platforms balances must be verified when they are used for one of the following functions: in trading relationships when the price of the product is determined by its weight, in official activities, for instance to fix taxes or sanctions, for the production of packages. If you want additional information about verification of platforms balances or if you do not know whether you need a verified scale, you can contact your local authorized Verification Centre or PCE Instruments.
|
|
If you have any questions, you can get a consultation from one of our engineers or technicians.
|
|
If you wish to view or print a selection of platforms balances from our catalogue, click the PDF symbol
|
