It is important to use the electrical multimeters in all places where electricity is processed and distributed and is sensible to use electrical multimeter. This applies to the sectors of renewable energies like wind systems, or any other place that consumes energy. Whenever it is necessary to have an overview of energy, electrical multimeters are of great service. Even if it comes to saving energy, electrical multimeters are useful. The electrical multimeter plays an important role in the energy management systems too. Additionally, they can indicate the power consumption of different points in particular. And they can also detect computers with excessive energy consumption and peak loads. By taking appropriate measures, you can save money. The electrical multimeters are not only useful for energy management systems, but also for control of the network quality. Overloads or failures of sensitive equipment caused by distortions in voltage are avoided because the electrical multimeters make these quantities visible. This leads to a greater availability of the system which again saves money. As the electrical multimeters are often equipped with digital interfaces such as Ethernet, Profibus or RS-485, they can be integrated easily into other systems or combined with additional drivers. The digital inputs and outputs allow drivers to activate switches or consult different states. On the big screen, you can read quickly and safely all the relevant parameters of the network.