PCE-180 CB CableTracker LAN / Cable Analyser
detects connections and cable breaks in channels, platforms and walls

The PCE-180 CB CableTracker LAN / Cable analyser is made up of a signal emitter and a highly sensitive receiver. The signal emitter of this cableTracker LAN / cable analyser is connected to a plug or the core of a cable and sends a coded signal along the cable. The signal receiver of the cableTracker LAN / cable analyser will help you to detect the cable with a sound. The problem that frequently arises in cabling within buildings is knowing which cable powers a particular connection and where the cable passes within the structure of the building. This is important to establish if, for example, you are required to put a hole in the wall. As the CableTracker LAN emits signals, it's possible to follow cables and can can detect cables without voltage so that insulation or walls don't need to be damaged to trace them. The volume and sensitivity of the CableTracker LAN can be adjusted. All conventional lines can be identified, including network and co-axial cables. The signal generator comes with alligator clips and a mains connector. The receiver can be used with other signal generators for detecting cables. At this link you will find other types of high quality cableTracker LAN / cable analysers.

 - Pocket-sized analyser
 - Follows cables in walls or channels
 - Detects cable breaks
 - Emits different signal tones
 - RJ-11 connector and alligator clips
 - Headphone jack
 - Flashing point indicates non-conductivity
 - Adjustable sensitivity
 - Includes connecting cable, batteries and user's 
   manual
 - High quality carrying case
 - Seguridad: CE, IEC / EN 61010-1:01

PCE-180 CB CableTracker LAN / Cable Analyser

Technical specifications

Line detection

by acoustic signal

Acoustic signal

pulsing tone
continuous tone

Connections

RJ-11 connector and alligator clips

Operating conditions

0 to 50°C / 5 to 95% r.h.

Power

2 x 9V batteries

Dimensions

Signal generator: 60mm x 65mm x 30mm
Sensor: 245mm x 60mm x 30mm

Weight

Signal generator: 120g
Sensor: 140g

Tracing a cable from the doorbell of the house

Looking for cables in an elevator

Looking for the correct fuse

Looking for a break in a cable

Contents
PCE-180 CB CableTracker LAN / Cable analyser, includes sensor or signal generator and connecting cables, 2 batteries, carrying case and user's manual

Here you will find all the measuring instruments available at PCE Group.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian in French

Below you will find an overview of the different product groups of measuring instruments