Digital Multimeters (DMM)
Here you will find digital multimeters for measuring electrical magnitude in different fields of electronics. All of the digital multimeters have a large, clear display and fit easily in the palm of the hand making them easy to handle. Digital multimeters are used, above all in professional training, education, the industrial sector and in workshops. They are invaluable to professionals due to their high level of accuracy. Here you can find all types of digital for taking measurements of low and high voltages, current, power and various other parameters. We offer devices that have manual or automatic range selection and with or without an RS-232 interface for transferring data to a computer for further analysis. The corresponding test cables for digital multimeters come with the device as well as batteries so that the device is ready to use straight out of the box. Digital Multimeters can be accompanied by an ISO calibration certificate either when it is ordered or included as part of an annual recalibration. This allows them to be integrated into the group of internal testing tools of a company. If you can't find the digital multimeters you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on: +44 (0)2380 987030 and our technical staff will advise you regarding our measuring instruments.

Here you can see digital multimeters from these companies:

Technical specifications for Digital Multimeters can be found at the following links:

Pen Multimeters

- PCE-PDM 1 Digital Multimeters 
  (Digital multimeters with automatic range selection (V AC/DC, Ω, diode test, continuity test))

- PCE-TT 1 Digital Multimeters 
  (Digital multimeters to check the tension of two poles for traffic and field rotation indicator)

- FLUKE F90 / F110 / F130 / F150 Digital Multimeters 
  (2-pole tension examiner multimeters, LED or LCD display, VDE/GS checked)

- CA 704 Digital Multimeters
  (Digital multimeters to measure voltage in circuits and wires, optional adapter plug)

Hand Multimeters

To the top

- PCE-DM 10 Digital Multimeters
  (Digital multimeters with auto-range selection, 600 V, small and mobile, non-contact voltage detection)

- PCE-DM 12 Digital Multimeters 

    (Digital multimeters with automatic range selection, 600V, 10A, 40MΩ, 10MHz, +760°C)

- PCE-SPM 2 Digital Multimeters

    (Digital multimeters to measure solar radiation in W / m², with memory and software).

- PCE-DM 32 Digital Multimeters 
  (Digital multimeters with RS-232, software, 1000 V, 20 A, 40 MΩ, 100 µF, 10 MHz, +1000 °C)

- PCE-UT 71D Digital Multimeters
  (Digital TRMS multimeters up to 100 kHz, highly accurate, high resolution display)

- PCE-DM 22 Digital Multimeters 
  (Digital multimeters with data logger, RS-232 and software, meets: IEC 1010 1,000V CAT III)

- PKT-3320 Digital Multimeters  
  (Digital multimeters for power, voltage, capacity, frequency, resistance, with non-contact voltage detection)

- Benning MM 7-1 Digital Multimeters
  (Digital multimeters for industrial applications, TRMS measurement, Low-Z measuring range)

- Metrix MX24B Digital Multimeters
  (Digital multimeters with Low-Z voltage range, automatic memory function)

- FLUKE 175 / 177 / 179 Digital Multimeters

 (FLUKE multimeters TRMS up to 1000 V and 10 A, 6000 digit LCD)

- C.A. 5287 Digital Multimeters
  (Digital multimeters , 30 kHz (V) and 20 kHz (A) bandwith, current loop control)

- FLUKE 233 Digital Multimeters

 (removable display, TRMS measurements of electricity and current, 10 A, 1000 V)

- C.A. 5289 Digital Multimeters
  (Digital multimeters up to 100 kHz, measurement of frequency, 0-20 mA monitoring)

- FLUKE 27 II Digital Multimeters
 (extra robust device with IP 67 and all possible functions to perform an error diagnostics)

- PCE-LC 1 Multimeters
  (Simple Multimeter, with wide measuring range)

- FLUKE 28 II Digital Multimeters
 (extra robust measuring device with IP 67, dust and waterproof for true-RMS)

- PCE-UT 532 Digital Multimeters
  (Digital multimeters with multiple measurement functions, voltage up to 1000 V)

- METRAHIT Extra Digital Multimeters
  (Digital multimeters with patented terminal lock, temperature measurement, 26 measurement functions)

- METRAHIT OUTDOOR Digital Multimeters
  (Digital multimeters with IP 65 protection against dust and waterproof, automatic locking of the terminals)

- METRAHIT ENERGY Digital Multimeters
  (Digital multimeters to measure the energy and power, with automatic terminal, temperature measurement)

- METRAHIT MULTICAL Digital Multimeters
  (Digital multimeters with integrated temperature sensor, current, voltage, frequency and temperature signals)

Graphical Multimeters

To the top

- MTX 3281B Digital Multimeters
  (Foldable digital multimeters, AC + DC measurement, TRMS up to 20 kHz, data storage, USB + bluetooth)

- MTX 3282B Digital Multimeters
  (Digital multimeters measure AC + DC, TRMS up to 50 kHz, USB + bluetooth, data recorder)

- FLUKE 287 Digital Multimeters
 (Measuring device with a dot-matrix of 50.000 digits and a data-logging function)

- MTX 3283B Digital Multimeters
  (Digital graphic multimeters, AC + DC measurement, TRMS up to 200 kHz, large data storage)

- FLUKE 289 digital Multimeters
 (Multitester with a dot-matrix and a low-pass filter, measuring function with a low power-impedance)

Oscilloscope Multimeters

To the top

- PKT-1205 Digital Multimeters   
  (Digital multimeters with integrated oscilloscope, 20 MHz  widthband, 2 channels, USB interface)

- PKT-1195 Digital Multimeters   
  (Digital multimeters with integrated oscilloscope, 2 channels, 100 MHz  widthband, USB interface)

- PCE-DSO 8060 Digital Multimeters
  (Digital multimeters with integrated oscilloscope and function genreator, band with of 60 MHz)

- PCE-UT 81B Digital Multimeters  
  (Oscilloscope (8 MHz), digital multimeters, frequency counter, USB port / internal storage)

- FLUKE 120-series Digital Multimeter Oscilloscope
 (compact, digital 40- or 20-MHz oscilloscope with a TRMS-function)

- OX7042 Digital Multimeters
  (Oscilloscopes with digital multimeter, 40 MHz bandwith, 2 galvanic seperated channel)

- OX7062 Digital Multimeters
  (Oscilloscopes with digital multimeter, 40 MHz bandwith, 2 galvanic seperated channel)

- OX7102 Digital Multimeters
  (Oscilloscopes with digital multimeter, 40 MHz bandwith, 2 galvanic seperated channel)

- OX7202 Digital Multimeters
  (Oscilloscopes with digital multimeter, 40 MHz bandwith, 2 galvanic seperated channel)

- OX7104 Digital Multimeters
  (Oscilloscopes with digital multimeter, 40 MHz bandwith, 2 galvanic seperated channel)

- OX7204 Digital Multimeters
  (Oscilloscopes with digital multimeter, 40 MHz bandwith, 2 galvanic seperated channel)

Calibrators Multimeters

To the top

- PCE-123 Digital Multimeters 
  (Digital multimeters for simulation and measurement of electrical signals and frequency)

- Kyoritsu 6310 Digital Multimeters 
  (Digital multimeters for up to 3000 A, harmonic analysis, long recording duration, colour display)

ESR Multimeters

To the top

- PCE-LCR 1 series Digital Multimeters
  (RLC gadget for measuring capacities, inductance and resistance, IP67)

Bench Top Multimeters

To the top

- PKT-4000 Bench Top Multimeters 

  (Bench Top Multimeters with absolute value measurement, 4 ¾-digit, 15 mm LED-display, diode-test)

- FLUKE 8845A Bench Top Multimeters 

  (6.5 digits Bench Top Multimeters, high performance and feature rich, Basic V dc accuracy of up to 0.0024 %)

- FLUKE 8846A Bench Top Multimeters 

  (6.5 digits Bench Top Multimeters, high performance and feature rich, dual display)

Clamp Meters / Multimeters

To the top

- PCE-DC 1 Digital Multimeters 
  (Digital multimeters up to 200 A AC/DC, frequency measurement included, voltage surge category III)

- PCE-DC 2 Digital Multimeters 
  (Digital multimeters up to 200 A AC/DC, ohms measurement included, voltage surge category III) 

- PCE-DC 4 Digital Multimeters 
  (Digital multimeters up to 1000 A AC, category III) 

To the top

- PCE-LT 1 Digital Multimeters

    (These digital multimeters are ideal for quickly testing network connections)

- PCE-EM 886 Digital Multimeters 

    (Sound, light, temperature, moisture, and external temperature, auto-ranging digital multimeter)

General information about digital multimeters:
The easy made construction and electrical components that are build in bulk production, are important advantages and important for our success of these instruments. Therefore, these gadgets are very economically priced, but also high classified in quality. In addition to that these digital multimeters are equipped with a protection circuit for overload and wrong polarity. Our instruments are nearly indestructible in the voltage measuring range. Collisions as well as crashes do not harm them because there are no movable parts outside the digital multimeters. Few measuring instruments show measuring options for frequencies, capacities, inductance as well as transistor and diode characteristics. By having sensors that measure sound, luminous intensity, humidity and temperature included, a few digital multimeters are not only designed for electrical values. With external sensors, which come with voltage outputs, the range of possible applications can be enlarged. Beside air humidity, sound, illumination or temperature measurements, the digital multimeters are able to measure further values of mechanical speed, pressure, air velocity and voltage, via a clamp. Multimeters are offered in several forms and types. Pen digital multimeters or voltage meters with digital multimeter function are used by craftspeople which carry out small measurements. Digital handheld multimeters are mostly used in classical digital multimeters designs with a display in the upper part, the multifunctional rotary switch in the middle of the digital multimeters and a test cable in the lower part of the digital multimeters. These digital multimeters are mostly used by maintenance professionals as a universal measuring instrument. Table or laboratory digital multimeters are used in stationary workplaces. These digital multimeters usually have a larger display and are able to be provided with 230 V AC. Further categories of digital multimeters are measuring ampere callipers with digital multimeter functions or oscilloscopes with digital multimeter function. The measuring range on the digital multimeters will be mostly set automatically or by hand.

Multimeters are divided into two groups of digital multimeter: Multimeters and analog multimeters. In the following part the characteristics will be described: Digital multimeter with an analog display can be found in Analogue Multimeters. The Multimeter is used for measurements of voltage and electricity. Beside these functions this modern multimeter owns the characteristics to measure capacity, inductance, resistance and temperature. The multimeter also includes an continuity and diode tester. Measured values will be measured via an AD transmitter and will be shown on the display. Beside the numerically display, the display of values can be shown on a baragraph. The user is able to sort the values into a range of measuring, much more easier. This is a great advantage of digital multimeters. The multimeter generates an analog display like it's known from analog multimeters. 

Principle: Measurement of currents with a multimeter:
Voltage will be measured in series. That means that you have to interrupt the normal current circuit so that current will flow. The resistance inside of the device is really low resistive. This is important for non falsified measurements.

On multimeter usually three sockets are available:

1. "COM" adaptor for ground wire, always required
2. mA to measure flows in mA ranges this bush will be used
3. 10A to measure great flows in the A-range this bush will be used

Principle: Measurement of voltage with a multimeter:
Voltages will be measured parallel to circuits. The multimeter will measure around the component whose values are desired. Mostly, voltage will be measured in reference to earth. In this case multimeter are highly resistive.

On digital multimeters there are two sockets available.

1. "COM" connection for ground wire, always required
2. "V/Ω " to measure voltage

Principle: Measurement of resistance with a multimeter
To measure resistance with the multimeter the test prods will be placed on both sides of the component. The multimeter usually doesn't measure resistance. Therefore it uses the Ohm's law. In this formula resistance will be the product of voltage/current. These both values can be determined. Resistance can be detected by this calculation.

On multimeter two sockets are available.

1. "COM" adaptor for ground wire, always required
2. "V/Ω " to detect resistance with multimeter

If you wish to view or print a selection of digital multimeters from our catalogue, click the PDF symbol.