Measures

Control Systems

Scales

Rotation Meters
Here you will find a selection of distinct rotation meters. There are different ways of measuring revolutions within the industrial sector, either optically or mechanically. The PCE-151 handheld series rotation meters with an RS-232 interface can measure revolutions and velocity and store the readings onto a computer using software which comes bundled with the device. Handheld digital rotation meters are ideal for measuring velocity and revolutions in research and maintenance. The PCE-T236 measures velocity both by contact and non-contact and has a good relation between price and quality. Non-contact measurement of velocity is done with the help of reflective tape. For a device that can be installed for measurements over a period of time, we recommend the use of PAX I. These devices have a digital display with digital and analogue outputs, different memory cards which are optional, and a combination of an optical sensor, a laser sensor or a mechanical measuring wheel. There is another variation for measuring revolutions and they are stroboscopes. Here you will find a description of these handheld rotation meters. If you can't find the rotation meters you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on: +44 (0)2380 987030 and our technical staff will advise you regarding our measuring instruments. Our engineers and technicians will be happy to help you with the rotation meters, and of course, with the other products in the field of regulation and control, and scales and balances.

Technical specifications for Rotation Meters can be found at the following links:

- PCE-AT 5 series Rotation Meters
  (rotation meters for 2 or 4 times motors)

- PCE-DT62 series Rotation Meters
  (optical measurement of revolutions with laser pointer)

- PCE-T236 series Rotation Meters 
  (contact and non-contact device with various measurement wheels included)

- PCE-151 series Rotation Meters 
  (contact and non-contact measurement with RS-232 interface and software)

- PCE-155 series Rotation Meters
  (contact and non-contact device with external optical sensor)

- PCE-VT 204 series Rotation Meters 
  (for inspecting motors, mechanisms and wheels)

- PCE-T259 series Rotation Meters 
  (tachometer / stroboscope in one)

- PCE-OM 15 series Rotation Meters
  (with button for changing phase)

- PCE-OM 100A / 200 series Rotation Meters 
  (powered by rechargeable batteries, for use by professionals)

Here you will find various images of rotation meters in use. We also offer a wide range of digital stroboscopes that can be used as optical rotation meters. Inside the devices there is a xenon bulb, similar to those used in flash photography, with the difference that it emits a continuous series of flashes that can be adjusted by the user. If we have an object that is rotating at a particular rate of rpms, and we adjust the flash frequency, if the object then appears not to be turning, then the device can determine the velocity at which the object is rotating by the flash rate of the strobe. To guarantee accurate readings the device can be calibrated and an optional ISO calibration can be done in our laboratories. This calibration can be ordered with the unit or as an annual recalibration at a later date. Normally, these stroboscopes don't require recalibration annually as the bulb has a constant brightness and a long lifespan. Rotation meters are used for determining the velocity of turning parts in machines and motors without the need to make an electrical or mechanical connection.

If you wish to view or print a selection of rotation meters from our catalogue, click the PDF symbol.