Measuring Instruments/
Test Equipment

Lux meters
Lux meters for measuring brightness in lux, fc or cd/m². Some lux meters are equiped with internal memory or a data logger to record the measurments. The measurment of light intensity is, each day, becoming more important in the workplace where protective screens are needed. The technique of measuring enviromental conditions, to which the measurement of light belongs, also occupies a lead position in scale of importance. Lux meters with data loggers as shown inour on-line store, are highly regarded especially due to their cosine correction of the angle of incident light. These lux meters have memory to store measured values, and software to analyse readings. We also offer a meter for measuring UVA radiation. Frequently we are asked about conversion between different measurement units. The following link contains information for: conversion of different measurment units for lux meters. If you require more information, you can view our page outlining typical illumination standards or if you don't find the lux meters you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our German offices: +49 (0)29 03 976 99-52; our Italian offices: +39 0583 975 114; or our Spanish offices: +34 967 543 548 and our technical staff will advise you regarding our products.

Technical specifications for lux meters can be found at the following links:

- PCE-222 series lux meters
  (includes sensors for sound, light, temperature and relative humidity)

- PCE-EM882 series lux meters
  (includes sound, light, temperature and relative humidity sensors)

- PCE-172 series lux meters
  (solid device which is standard in the industrial sector)

- PCE-L335 series lux meters 
  (high measurement range: 400,000 lux)

- PCE-174 series lux meters
  (with memory and RS-232 interface)

- PCE-UV34 series lux meters 
  (measures UVA and UVB radiation in µW and mW/cm2)

The FNL (German institute of Standards) has extensive information about measuring light in the workplace. The commission for the standardisation of technical lighting in DIN is concerned with the DIN standard in respect to natural and artificial ultraviolet light, visible light and infrared. The FNL makes determination about the following areas: terminology, basic visual requirements, fotometría, all applications of interior and exterior illumination and the photo biological effects of light and radiation.

Due to numerous requests relating to the lux meters and measured brightness, we have formulated in a table a series of accepted minimums that should be maintained for different indoor situations or locations. In regards to the outsdoors, substancally higher values are given, for example, 30,000 lux or 200,000 in sunlight. These values are for reference purposes only and PCE Group does not guarantee their accuracy.

If you wish to view or print a selection of lux meters from our catalogue, click the PDF symbol.