PCE-SH 500 force meter
with memory and RS-232
interface
|
The PCE-SH 500
force meter is for measuring traction and
compression to a high resolution. The force meter
are frequently used in test laboratories for
determining limits, ruptures and necessary force
to employ interrupters.
The memory for the device and the components
which come included with the device complete its
attractive list of features. The following links
show devices with similar characteristics to this
force meter but without memory:
Model
PCE-FM.
Here you will find a
variety of distinct force meters that we have
available.
|
-
Measures
in Newton and kilograms with a
high resolution
-
4 digit LCD
-
Ni-Hi
battery for approx. 20 hours
of use
-
Controls battery power to prevent readings
being taken with a low battery level
-
Peak
memory for traction and compression
-
Keeps
values on the display
-
Memory for 10 readings
-
Calculates average value
-
Overlaod protection up to
120%, shows readings up to 105%
|
PCE-SH 500 force meter
View or print the user's manual
|
|
Technical
specifications |
|
Measurement range |
0 to 500 N |
|
Resolution |
0.1 N |
|
Accuracy |
±0.5%
(of reading) |
|
Max
Hold |
yes |
| Memory |
yes, up to 10 readings
|
| Interface |
RS-232 |
|
Data transfer |
pressing the PRINT key
to a computer to process data |
|
Overload protection |
up to a maximum of
120%
the device shows readings up to 105% |
|
Display |
4
digit LCD |
|
Power |
Ni-Hi rechargeable battery (20
hours) |
|
Battery level
control |
prevents measurements when battery is low |
|
Dimensions |
225 x 66 x 36mm |
|
Weight |
approx. 460g |
|
Contents
PCE-SH 500 force meter,
6 adaptors (hook, extension, point, rounded
base, Ni
Hi rechargeable,
charger, carrying case and user's manual
|
Optional
accessories
- Test
position that can be adapted to the force
meter (a mounting base is required to adapt
it)
- Wedge shaped
handle
- Mounting base
for adapting the device
- ISO
laboratory calibration and certificate
|
|
Test Position
The force meter can be combined with any of the
three test positions we have available.
Two test positions are equipped with a crank and
one the third has a motor.
The effective use of the test position is in
daily testing of materials in a laboratory and
you wish to maintain the same conditions,
eliminating the possibility of human error.
The technical specifications for the different
positions are available at this link:
Test Positions.
Descriptions of test positions can be found
within the corresponding on-line category:
force meters.
|
 |
|
Conversion table for
different units of force (no
weight)
|
|
|
|
|
|
Here you will find all
the measuring
instruments available at PCE Group. |
If you have any doubt, call our
technicians on:
Germany:
+49 (0)29 03 976 99-52
Italy:
+39 0583 975 114
Spain:
+34 967
543 548
|
This page in German
in Italian
in Spanish
in Croatian
in French
 |
|
Below you will find an overview of the different product groups
of measuring instruments |
|
|
|
|
|
