PCE-888 pyrometer
infrared and
accurate to within ±1.5%, for
measuring surface temperature
without contact
The PCE-888
pyrometer is ergonomic and easy to
carry from one place to another. This light infrared
pyrometer is attractive due to its
size and its accuracy thanks to a
visible laser pointer. It was
designed for industrial use and for
professionals working in inspection
and maintenance of heating systems,
ventilation systems, air
conditioning units, in the
automotive industry, for electrical
systems and fuse boxes, as well as
for pilot installations and test
positions.
The pyrometer can be used in adverse
conditions. It has a backlit LCD.
The device has avisible laser to
quickly and accurately target the
area to be measured allowing for
measurements to be taken at certain
distances if the object being
measured it hot or difficult to
access. The emissivity can be
adjusted between 0.1 and 1, and covers 90% of possible
measurements taken.
Please note that when measuring an
object, the surface area being
measured must be bigger than the
surface area of the visible laser
pointer. To decrease the size of the
laser pointer, the diatance between
the object and pyrometer must be
decreased.
Large backlit LCD with 3.5
digits showing a maximum value
of 1999
Shows
readings in °C or °F
Auto
shut-off, after 7 minutes of
inactivity
Retains
current values
Good ratio between distance and
point of measurement of 8 : 1
(approximate diameter of
measurement point: 25mm at a
distance of about 40cm, 50mm at 80cm,
100mm at 1.6m and 200mm at 3.2m)
Includes battery
and user's manual
Pre-installed mount for tripod
PCE-888 pyrometer
View or print the user's manual
Ratio between measurement distance
and size of measurment point of 16 : 1
Technical
specifications
Measurement
range
-50
to 550°C
Resolution
0.1°C
(between -50 and 200°C)
1°C (between 201 and 550°C)
Accuracy
±5°C
at -50 to -20°C,
above range ±1.5% of readings ±2°C
Response
time
<500ms
Measurement
rate
2.5
times per second
Ambient
temperature range
0 to 50°C
Power
9V battery
Dimensions
230
x 56 x 100mm
Weight
290g
Measurement
point (ratio of distance to size)
16
: 1
Emissivity (variable)
0.1
to 1
Laser
pointer
visible
laser point
Laser class
II
(output <1mV, wave length of 630 - 670nm)
Backlit LCD
yes
Contents
PCE-888 pyrometer, battery,
carrying case and user's manual
