Stroboscope with accumulator Beacon
handheld device with high illumination power

This stroboscope is very attractive due to both its high illumination power and usability. The Beacon stroboscope is used to control rotary pieces, machines and installations. Value pulsations in the screening area - Determine revolutions of components of machines - Use the stroboscope for preventive maintenance.
Both its format very easy to use and its high flash energy allow the use of the stroboscope to take measurements in places with high light as well as in great surfaces. Flash frequency is adjusted from the flat keypad which is shown in the display. The stroboscope can be used for long measurements. When using in dark areas, the stroboscope will be used with 2/3 and 1/3 of its total power. At this link you will find other handheld stroboscope with lower illumination power. Here at this link you can find an overview of any type of stroboscope  that you may need.

- Portable stroboscope powered by an accumulator
- Long-lasting  Xenon lamp
- High illumination power
- 1374 lux from a distance of 5 meters
- Accumulator of 36000 flash/min has a duration of
  60 minutes with an intensity of 33 % and 22
  minutes with an intensity of 100 %
- A replacement accumulator is included
- Up to 18,000 flashes per minute (300 Hz)
- It is delivered with an replacement accumulator,
  charger and user's manual

Beacon Stroboscope with accumulator

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian  in Spanish in Croatian in French in Dutch  
in Hungarian in Polish in Serbian in Russian in Turkish in Portuguese

in Portuguese

Below you will find an overview of the different product groups of measuring instruments