PCE-TDS 100H ultrasonic flow meter
according to the differential measurement of duration method / determines flow velocity / measuring method for homogeneous liquids

PCE-TDS 100H ultrasonic flow meter  is designed to measure the fluid velocity of liquid within a closed pipe. It is a hand-held measurement system which is both easy to use and to install. The PCE-TDS 100H ultrasonic flow meter operates according to the difference in the transit time measured. The measuring principle of the PCE-TDS 100H ultrasonic flow meter is very easy.  In a diagonal measurement the tube will need less time in the same flow direction than against the flow direction. When the flow increases, it will need more time to measure flow if the measurement is against the flow direction and less time if the measurement is in the same flow direction. The difference between the flow direction therefore directly depends on the flow velocity. The PCE-TDS 100H ultrasonic flow meter determines the flow velocity. Electro acoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed on both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a flange. The display will quickly show the flow velocity. The PCE-TDS 100H can be used for metallic, plastic and rubber tubes. If you want to see another flow meter, click on the following link.

View / print user's manual of the PCE-TDS 100H ultrasonic flow meter.

The PCE-TDS 100H ultrasonic flow meter measuring a pipe.

Delivery contents
1 x PCE-TDS 100H ultrasonic flow meter
2 x type M1 electroacoustic transducers
2 x 5 m connection cable
2 x towing chain
3 x AAA Ni-H accumulators
1 x charger cable
1 x coupling gel
1 x flexometer
1 x aluminium carrying case
user's manual

v -measured velocity
T1 - Run time of the ultrasonic sign in the flow direction
T2 - Run time of the ultrasonic sign against the flow direction
 L - lenght of the ultrasonic way
α - ultrasonic signal angle to the flow

Here you will find all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian in French

Below you will find an overview of the different product groups of measuring instruments