 |
|
- Contact
us Other instruments: - Measures
-
Scales |
 |
|
PCE-NA 5 bar graph digital indicator |
||
|
The PCE-NA 5 bar graph digital indicator has a free-programming bar indicator of 55 positions. The PCE-NA 5 bar graph digital indicator can offer an additional digital display to show the value in figures. The PCE-NA 5 bar graph digital indicator can process different input signals. Apart from normalized signals, the PCE-NA 5 bar graph digital indicator can also be connected to Pt100, Pt500, Pt1000 sensors, thermo-elements (J, K, T, etc.), voltages up to 600 V, current up to 5 A as well as resistances up to 10 kΩ. The PCE-NA 5 bar graph digital indicator has available 4 alarm relays to activate several alarm units or to turn off a pump controller. The PCE-NA 5 bar graph digital indicator is also equipped with diverse OpenCollector outputs. Through the analog output for normalized signals, users will be able to connect the device to a display system to document all measuring values (for instance). The PCE-NA 5 bar graph digital indicator comes with a RS-485 interface which can be connected to a Modbus. The PCE-NA 5 bar graph digital indicator is normally mounted on a panel and can be protected by a 4-digits PIN code. Here you will find an overview of the bar graph digital indicators available at PCE-Instruments. |
||
|
View / print user's manual of the
PCE-NA 5 bar graph digital indicator |
||
|
- 55-positons bar graph digital
indicator - 4 digits and 7 segment indicator - Analogue output |
- 4
alarm outputs |
|
| Technical specifications | ||
| Input |
Type |
Measurement range |
| Pt100 | -200 ... 850 ºC | |
| Pt500 | -200 ... 850 ºC | |
| Pt1000 | -200 ... 850 ºC | |
| J (Fe-CuNi) | -100 ... 1100 ºC | |
| N (NiCr-NiAl) | -100 ... 1370 ºC | |
| N (NiCrSi-NiSi) | -100 ... 1370 ºC | |
| E (NiCr-CuNi) | -100 ... 850 ºC | |
| R (PtRh13-Pt) | 0 ... 1760 ºC | |
| S (PtRh10-Pt) | 0 ... 1760 ºC | |
| S (PtRh10-Pt) | -50 ... 400 ºC | |
| Resistance | 0 Ω ... 10 kΩ | |
| Voltage |
±300
mV ±0 ... 600 V |
|
| Current |
±40
mA ±5 A |
|
| Analog output |
galvanic isolation 0/4 ... 20 mA (RL≤500 Ω) 0 ... 10 V (RL≥500 Ω) Response time: 100 ms |
|
| Relay output (4 pieces) |
max. 250
AC V / 150 DC |
|
| Digital output |
RS-485 |
|
| Power supply of the sensor |
24 V DC, max. 30 mA |
|
| Numeric display |
4-digits and 7-segment LED display |
|
| Display range |
-1999 ... 9999 |
|
| Units |
56 units available |
|
| Digital bar indicator |
88 mm / 55 segments |
|
| Resolution | adjustable | |
| Pressure | ±0,5 segments | |
| Ambient conditions |
Operating: -10 ... 55 ºC / <95
% R.H. Storage: -25 ... 70 ºC / non-condensing |
|
| Dimensions | 48 x 144 x 100 mm | |
| Dimensions |
44 x 137 mm |
|
| Power supply voltage |
85 ...
253 V AC (45 ... 65 Hz) or DC 20 ... 40 V AC (45 ... 65 Hz) of DC |
|
| Absorbed power | <12 VA | |
| Protection | Front: IP 50 | |
| Weight | <400 g | |
| Mounting | mounting clips with screws, connection via terminal strip | |
| Case |
robust plastic |
|
|
|
||
|
Delivery
contents |
||
| Available versions of the PCE-NA 5 bar graph digital indicator | ||
| PCE-NA 5-1 | Power supply: 85 ... 253 V AC/DC | |
| PCE-NA 5-2 | Power supply: 85 ... 253 V AC/DC, analog output 4-20 mA, RS-485 interface | |
| PCE-NA 5-3 | Power supply: 20 ... 40 V AC/DC | |
| PCE-NA 5-4 | Power supply: 20 ... 40 V AC/DC, analog output 4-20 mA, RS-485 interface | |
 |
 |
|
| Here you will find an overview of all the measuring instruments available at PCE Instruments. | ||
|
Contact: |
||
|
This
page in German
|
||
in Spanish
in French
|
Below you will find an overview of the different product groups of measuring instruments |
||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||