 |
|
- Contact
us Other instruments: - Measures
-
Scales |
 |
|
UMU 100 Universal transducer |
||
|
The UMU 100 universal transducer is the ideal device for Pt100 sensors as well as for thermo elements (type K, J, etc...). The UMU 100 universal transducer can avoid damages in both machines and production plants. The UMU 100 universal transducer integrates current and a voltage output signals. The UMU 100 universal transducer can optionally have a relay to check for instance a visual alarm when it exceeds the alarm limit. Thanks to the galvanic insulation, power supply does not affect the measured signal, so the UMU 100 universal transducer is a safe and accurate measurement device to be used in your company. Here you can find the universal transducer that best suits your needs. |
||
|
View / print user's
manual of the UMU 100 universal transducer |
||
|
- For Pt100 sensors and thermo elements - Error display - Universal power supply - Galvanic insulation (inputs and outputs) |
- 2 optional alarm relays - Voltage and current input - Voltage and current output - It can be connected to a display |
|
| Technical specifications | ||
| Input |
Measurement range |
Accuracy |
| Pt100 | -200 °C ... 850 °C | ±0,2 °C |
| Linear resistance | 0 Ω ... 10 kΩ | ±0,1Ω |
| Potentiometer | 10 Ω ... 100 kΩ | --- |
| Thermo element (depending on the thermo element type) | - 200 °C ... 2300 °C | ±2 °C |
| Current (free programming) |
0 mA ... 20 mA 4 mA ... 20 mA |
±4 µA |
| Voltage (free porgraming) |
0 V ... 1 V DC 0,2 V ... 1 V DC 0 V ... 5 V 1 V ... 5 V 0 V ... 10 V 2 V ... 10 V |
±0 µV |
| Output | Range | Load |
| Current |
0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA |
|
| Voltage |
0 V ... 1 V DC 0,2 V ... 1 V DC 0 V ... 5 V 1 V ... 5 V 0 V ... 10 V 2 V ... 10 V
1 V ... 0 V DC 1 V ... 0,2 V DC 5 V ... 0 V 5 V ... 1 V 10 V ... 0 V 10 V ... 2 V |
|
| Relays (close, open, Hold) |
Maximum voltage: 250 V RMS |
|
| General specifications | ||
| Power supply |
24 V AC ... 230 V AC / 50 Hz ... 60 Hz 24 V DC ... 250 V DC |
|
| Max. absorbed power | ≤2,5 W | |
| Response time (0 % ... 90 % / 100 % ... 0 %) |
Temperature input: ≤1 s Current and voltage input: ≤400 ms |
|
| Calibration temperature | 20 °C ... 28 °C | |
| Max. relative humidity | 90 % r.H. | |
| Dimensions with front display | 109 x 23,5 x 116 mm | |
| Dimensions without front display | 109 x 23,5 x 104 mm | |
| Protection |
Case: IP 50 Terminals: IP 20 |
|
| Weight | 175 g | |
|
|
||
|
Delivery contents 1 x UMU 100 universal transducer, 1 x user's manual |
||
 |
 |
|
| Here you will find an overview of all the measuring instruments available at PCE Instruments. | ||
|
Contact: |
||
|
This
page in German
|
||
in French
|
Below you will find an overview of the different product groups of measuring instruments |
||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||