 |
|
- Contact
us Other instruments: - Measures
-
Scales |
 |
|
Voltage indicator PCE-N20Z |
|
|
The voltage indicator can be used to make measurements of AC voltage to 400 V. In this voltage indicator, the voltage to be measured is connected directly and the value can be read on the LED display. The three colors of the display screen in this voltage indicator vary according to the measured value. The user can set the limit values in the voltage indicator. This allows a rapid assessment of the reading. The two open collector outputs can be used to control voltage. When exceeding the upper or lower limits, the alarm is activated in the voltage indicator. To set the alarm limits and color changes of the display of the voltage indicator, you can use the software LPCon. This allows you to set the voltage indicator and also to read an existing configuration. Once you have set a configuration, you can store it and later retrieve it. Besides, you can configure multiple voltage indicators with the same settings. The connection between the voltage indicator and the PC is done via the optional programming adaptor PCE-PD14, which converts the data stream and passes it to the computer via the USB port. The voltage indicator is available in two versions, which differ in their power supply (230 V or 24 V). The following link goes to another type of voltage indicator. |
|
|
|
|
|
- Voltage indicator with 2 alarm outputs - Setting through USB port - tricolor LED display |
- Front pannel with IP65 protection - Voltage measures up to 400 V - Screw terminal connections |
| Technical specifications | |
| Voltage indicator input | 4 ... 400 ... 480 V |
| Input resistance | 2 MΩ |
| Accuracy (20 - 500 Hz) | ±(0,5 % FS + 1 digits) |
| Time for average value | 0,5 ... 20 s |
| Outputs | 2 x open collectors, 30 V, 20 mA |
| Display | tricolor 5-digit LED of 7 segments, height 14 mm, |
| Indication range | -19999 ... 99999 |
| Temperature |
Operation: -10 ... +55 ºC Storage: -25 ... +85 ºC |
| Maximum relative humidity | <95 % non-condensing |
| Dimensions | 96 x 48 x 64 mm |
| Panel mounting dimensions | 92 x 45 mm (according to DIN) |
|
Power supply voltage Voltage indicator PCE-N20Z-1 Voltage indicator PCE-N20Z-2 |
85 ... 253 V AC/DC 20 ... 40 V AC/DC |
| Power consumption | <6 VA |
| Type of protection for the Voltage Indicator | Front: IP 65 |
| Weight | <250 g |
| Mounting | mounting clips with screws, connection via terminal blocks |
| Digital display case | hard plastic |
|
|
 |
|
The voltage indicator is electrically connected through the terminal screw on the back. In the case of the voltage indicator, there is an overview of the connections which facilitates quick and safe installation in situ. The programming interface of the voltage indicator (PD14) is also located here. It is a RJ-11 connector. The programming adaptor sends the data stream to the USB port. |
|
|
Delivery contents 1 x PCE-N20Z voltage indicator (model 1 or 2), digital indicator, fixing material, joint and user's manual |
|
|
Versions of the voltage indicator Voltage indicator PCE-N20Z-1 Voltage indicator PCE-N20Z-2 |
|
|
Optional accessories |
|
 |
 |
| Here you will find an overview of all the measuring instruments available at PCE Instruments. | |
|
Contact: |
|
|
This
page in German
|
|
in French
|
Below you will find an overview of the different product groups of measuring instruments |
||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||