Grooves Caliper PCE-DCP 300B
Grooves caliper with pointed measuring surfaces / shift between inch and mm / with setscrew and thumbwheel switch / for a measuring of outside grooves
|
The Grooves Caliper PCE-DCP 300B is a precise
outside grooves caliper. With the pointed measuring surfaces the grooves caliper
PCE-DCP 300B is special adapted for grooves. A flute is an oblong groove or
indentation. Grooves caliper can
have waves or scares. Grooves calipers are not classed to the DIN norm. The
right dosages of the measuring force is important. You have to put the branches
together with a small resistance. If you push the branches too heavy together
the result is a adulterated measurement. The result changes proportional. For
further information about the Grooves Caliper PCE-DCP 300B, please read the
following technical data or call our hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you
regarding the Grooves Caliper PCE-DCP 300B or any other product in terms of regulation
and control or scales
and balances by PCE
Instruments.
|
|
|
- with depth measurement rod
- stainless steel
- long branches
|
- with setscrew
- with threaded chart
- easy execution
|
Technical Data of the Grooves Caliper PCE-DCP 300B
|
Grooves Caliper
|
PCE-DCP 300B
|
Measuring range
|
0 … 300 mm
0,0005”
|
Accuracy
|
±0,03 mm
|
Display
|
LCD-Display
|
Measuring system
|
100 g (with battery)
|
Measuring speed maximum
|
<
25% under reference-conditions at Co-60
Overload capacity 10- fold
|
Current supply
|
10- fold
|
Ambient temperature
|
LCD with connectable background lighting, acoustic impulse signalisation
|
Delivery Content of the Grooves Caliper PCE-DCP 300B
|
1 x grooves caliper
PCE-DCP 300B, 1 x battery, 1 x plastic case, 1 x manual
|
|
|
Here
you can see similar products of "Grooves Calipers":
|
-
Grooves
Caliper PCE-DCP 200N
(easy caliper gauge with thumb wheel, set screw, depth measuring
rod) |
|
- Grooves
Caliper PCE-DCP 300N
(sturdy caliper gauge with set screw four-digit numbers display
plastic case) |
|
-
Grooves
Caliper PCE-CT 25
(low cost-products with intern sensor to check the paint bigness
motor vehicle) |
|
-
Grooves
Caliper PCE-CT 26
(low cost-products with extern sensor to check the paint bigness
motor vehicle) |
|
-
Grooves
Caliper DFT-F
(beginner model with intern sensor to do measurements on steel
and ferric) |
|
-
Grooves
Caliper DFT-FN
(f-/n-model to measure steel, ferric and non-ferrous metal / f.e.
aluminium) |
|
-
Grooves
Caliper PT-FN3
(combo meter, ferrous + non ferrous, with intern sensor, storage,
software) |
|
-
Grooves
Caliper PT-FN
(combo meters, ferrous + non ferrous, with intern probe, storage,
software) |
|
-
Grooves
Caliper PCE-TG100
(meter for all materials, like metal, glas, plastic) |
|
-
Grooves
Caliper PCE-TG110
(meter for all materials, with test probe for temperatures up to
+400 °C) |
|
-
Grooves
Caliper PCE-TG120
(meter for all materials with angled miniature test probe) |
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|