LED Handheld Stroboscope - PCE-LES 200
LED stroboscope / light and compact / high flash frequency: max. 300,000 flashes per minute / IP65 (waterproof and dustproof) / aluminum housing / excellent shock protection

The LED Handheld Stroboscope PCE-LES 200 is one of the most powerful in its class with up to 300,000 flashes per minute. The quartz  driver of the LED handheld stroboscope provides very accurate flashes. The light intensity of this LED handheld stroboscope is far superior to other LED handheld stroboscope models. This LED handheld stroboscope has succeeded in achieving the goals of  "maximum light performance and "surface of uniform illumination". This has been achieved thanks to powerful LEDs last generation and smart electronic control. The LED handheld stroboscope is a versatile instrument for visualisation of very fast movements. The LED handheld stroboscope is an indispensable tool for monitoring and inspection of facilities, such as the printing industry or textile industry. The LED  handheld stroboscope allows non-contact speed measurement: If the frequency of the flash of the LED  handheld stroboscope is equivalent to the frequency of movement, the illusion is that the object is stationary. Measurements can be read on the screen of the LED handheld stroboscope. Also, the LED handheld stroboscope meets the requirements of protection class IP65 (protected against water and dust) and therefore it can be used in adverse environmental conditions.  You will find examples of use if you click here. If you have questions, see the technical data below or contact us. Our technicians and engineers will gladly advise you on this handheld stroboscope and of course, on the other products in the field of regulation and control, measuring instruments and scales or balances

- High frequency flash: max. 300,000 flashes 
  per minute (FPM)

- Very high light performance: 1500 lux @
  FPM 6000 / 20 cm

- IP65 (waterproof and dustproof)

- Extensive range of adjustment

- Adjustment of the offset in degrees between the trigger signal and the flash

- Adjusting the delay in milliseconds between 
  trigger signal and the flash

- Aluminium housing / excellent shock protection

- Flash colour of approx. 6,500 K

General technical specifications

Frequency range

30 ... 300.000 rpm 

Display

several lines, LCD

Accuracy

0.02% (±1 digit)

Resolution

±0.1 (30 ... 999 r.p.m)

±1 (1000 ... 300.000 r.p.m)

Norms

EC

Protection

IP65

Flash technical specifications

Flash duration

adjustable

Flash intensity

1500 Lux @ 6000 r.p.m / 20 cm

Flash colour

approx. 6.500 K

Power supply

Power supply

3 x AA batteries or NiMH (AA) accumulator

Operating time

NiMH accumulador : approx. 11 h = @ 6.000 r.p.m.

According to setting

Batteries: approx. 5 h = @ 6.000 r.p.m

Housing

Material

Aluminium housing / shock excellent protection

Dimensions 

191 x 82 x 60 mm

Weight

approx. 400 g (batteries included)

Environmental conditions

Temperature

0 ... 45 ºC

Humidity

IP65

Trigger input

Principle

potential free

Low level

< 1 V

Level

3 ... 32 V

Minimum impulse length

50 µs

Inverted polarity protection

yes

Trigger output

Principle

resistance transistor output against short circuits and overvoltage

Level

NPN, 32 V max.

Impulse length

adjustable

Maximum power

50 mA

Inverted polarity protection

yes

LED-Stroboskop PCE-LES 200

Delivery contents
1 x  LES PCE-200 stroboscope, 1 x cable jack for connection to external trigger, 1 x Certificate, 3 x AA batteries, user´s manual

Optional components

- Tripod Adapter
Especially for continuous measurements, the tripod adapter is a great help for the LED stroboscope. The tripod adapter can safely hold the stroboscope in any tripod.

- Tripod
Lightweight aluminum tripod can be used, for example, in continuous measurements, since it guarantees the reproducibility of results, as measurements are made under the same conditions. Another advantage is that the user's hands are free, allowing you to take note of the measurement values or perform other tasks.

- ISO calibration and certificate
For companies that wish to incorporate the LES PCE-200 stroboscope into their internal quality control system of tools or for annual calibrations. The certification meets ISO standards and includes a laboratory calibration and a certificate which contains the measurement values. It also indicates the Company name and address or the person who ordered the device.

Below you will find an overview of the different product groups of measuring instruments