PAX-P digital indicator
intelligent process indicator / scalable (digital)/ 5-digit display / 20 measurements per second / connection options / linearization in 16 steps / Protection IP 65

The PAX-P digital indicator is a very flexible device used to measure and display processing signals. The PAX-P digial indicator can process input signals of 0-20 mA, 4-20 mA and 0-10 V. The PAX-P digital indicator has a robust plastic case as well as a high protection (IP 65) to be used in adverse industrial conditions. The adjustable 14 mm LED display ensures an accurate reading of measured values, even in dark areas. The PAX-P digital indicator can also be connected to a physical unit. A sheet with labels containing the most common quantities can be optionally ordered. The PAX-P digital indicator can be quickly set up with the 5 keys placed on the front panel. The instrument can be optionally set up in the PC through a RS-232 Port. This function enables to record the configuration to be transferred to other digital indicators. There are optional cards available which allow to enlarge both digital and analog interfaces (i.e. 4-20 mA, RS-232, Profibus). Here you will find an overview of all digital indicators available at PCE-Instruments.

- Scalable (digital)
- The dispaly can be read in sunlight
- High protection (IP 65)
- Totalising counter
- Lighted unit
- Sensor power supply
- Optional cards (RS-485, Profibus, etc.)

View / print user's manual of the
PAX-P digital indicator

Input

0/4 - 20 mA or 0 - 10 V

Measurement rate

Resolution

Current: 1 5A
Voltage: 1 mV

Accuracy (18ºC - 28ºC)

Internal impedance

Scale

Display

Indication range

Indicators

Inputs for functions

Totalizer

Operation Modes

Sensor power supply

Ambient temperature

Dimensions

Dimensions for wall mounting

Power supply

Protection

Weight

Mounting

Case

Delivery contents
1 x PAX-P digital indicator (0000 or 0010), fixing material, joint and user's manual

Extending cards:
- RS-485 interface
  [terminal strips or 2xRJ11)
- RS-232 interface

  [terminal strips or SUB-D with 9 poles)
- DeviceNet interface
- Profibus-DP interface
- Card with analog output
- Card with relay output
- Card with output for transistor
- Sheet with labels
- Case

With the help of the software, the PAX-P digial indicator can quickly and accurately display measurement values.

Digial indicators are used for companies to show measurement values on a display. Such digital indicators include scale-free current or voltage inputs. This means that the user can connect the PAX-P digital indicator to different sensor types with different output signals. Thanks to the free-programming scale, the user can select the relationship between the quantity and the outpur signal from the sensor or transducer. For such scale, two linear sensors with two measurement points are enough. For example, if a humidity transducer produces an output signal of 4 mA with a humidity of 0% , and another signal of 20 mA for a humidity of 100 %, the digial indicator will process this signal and display air humidity.

Contact:
PCE Instruments UK Limited
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

This page in German in Italian in Spanish in Croatian in French

Below you will find an overview of the different product groups of measuring instruments