Gas Transmitter of CO2 MF-420IR gas transmitter for the CO2 measuring / analog output / robust housing
|
The gas transmitter of CO2 MF-420IR-CO2 is compact and solid and does not require habitual maintenance. This gas transmitter determines the carbon dioxide content in the air with the aid of an infrared sensor with a room temperature between -10 and +50 °C. The housing of the CO2 gas transmitter is made of aluminum and it is suited to be mounted on the wall. Due to the fact that the measurement signals take place according to a new digital algorithm and that the material and the construction of the bucket is new, the CO2 gas transmitter MF420-IR measures the dioxide concentration carbon in a faster, more precise and economic manner than the conventional systems. The system of measurement determines the absolute CO2 content in the air. The gas transmitter is continuously put under automatic control and it detects errors in the hardware and software. The measurement range of the gas transmitter is linear. It is powered by 24 V. The preparation and the emission of the measurement signals (linear power output with a choice between 4-20 mA or 0-10 V) are integrated in the measurement system. The evaluation and the processing of the values take place in a device which is connected by the user according to its specifications (e.g. ventilation system, SPS, limit monitor, indicator). An optional module exists with which the gas transmitter can be connected to Ethernet whereby the analogical data is fed in the network. Typically, it is not necessary to calibrate the transmitter, but in case you have to do it, you should take it to a specialist. At the following link we explain the importance of the quality of the air and the influence of the carbon dioxide content in the human being: (Explanation of the quality of the air). In case you have any question on the gas transmitter, consult the technical data next or contact us: +44 ( 0 ) 2380 98703 0 . Our technicians and engineers will advise you on this gas transmitter or any other product our regulation and control systems, meters or scales of PCE Instruments.
|
|
- Infrared sensor for CO2 - No maintainance required - Aluminium housing - It can be mounted on wall - Standard measuring ranges: 0-3.000 ppm (0.3 Vol%) 0-6.000 ppm (0.6 Vol%) 0-10.000 ppm (1 Vol%) 0-50.000 ppm (5 Vol%) You can require other possible ranges - Output 4-20 mA (0-10 V upon request) - CO2 measurement ± 2% MBE
|
Industrial CO2 gas transmitter
|
Technical specifications |
Transmisor
|
Power supply Power |
connection terminals with screws approx. 100 mA; output 24 V |
Connections Pin 1 Pin 2 Pin 3 |
0 V 4-20 mA ( 0-10 V upon request) 24 VDC ± 5%
|
Environmental temperature |
-10 ... +50 °C |
Atmospheric pressure |
900 ... 1,100 hPa |
Humidity |
15 ... 95% R.H. |
Output |
4-20 mA (max. charge 450 Ω)
|
Protection |
IP 40
|
Dimensions |
90 x 85 x 65 mm |
Weight |
approx. 500 g
|
Connection cable |
3 x 1.52 Cu + ground (protected cable)
|
Length |
conductors of two-way traffic of 50 Ω |
Sensor
|
Gas input |
by diffusion |
Measurement range
0 ... 3.000 ppm CO2 0 ... 6.000 ppm CO2 0 ... 10.000 ppm CO2 0 ... 50.000 ppm CO2
|
that is 0 ... 0.3 Vol % CO2 that is 0 ... 0.6 Vol % CO2 that is 0 ... 1.0 Vol % CO2 that is 0 ... 5.0 Vol % CO2
|
Warm up time |
5 min |
Accuracy |
±2 % |
Reproducibility |
±1 % |
Response time |
approx. 30 s |
Delivery content 1 x CO2 gas transmitter MF-420IR, user's manual
|
Optional - ISO calibration
|
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|
This page in German in Italian in Spanish in Croatian in French in Dutch in Hungarian in Polish in Serbian in Russian in Turkish in Portuguese in Portuguese
|