Measuring Instruments/
Test Equipment

Conductivity meters

At PCE-Group you will find both standard and waterproof conductivity meters. There are also conductivity meters available for flowing water or pure water (highly recommended for specific industries) as well as the ones with different conductivity measurement ranges. An important factor is that conductivity meters normally measure electric conductivity in µS/cm, however they can also take measurements in mg/l (for direct reading of content in dissolved solid substances). The relation is established as follows: 2 µS/cm = 1ppm (parts per million) = 1 mg/l.  Compensated temperature in conductivity meters can be automatic or by hand. If you don't find the conductivity meters you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on: +44 ( 0 ) 191 377 3398 and our technical staff will advise you regarding our measuring instruments.

Technical specifications for our conductivity meters can be found at the following links:

- Conductivity meters PCE-CM 41 
  (conductivity meters to LF / TDS and temperature; automatic temperature compensation)

- Conductivity meters PCE-SM 11
  (digital conductivity meters to determine the amount of salt aqueous media in %)

- Conductivity meters PCE-PHD1 
  (conductivity meters to measure pH value, conductivity, oxygen and temperature)

Information about conductivity: An object's or circuit's ability to conduct an electric current between two points. Electrolytic conductivity of aqueous solutions (water) will depend on the amount of substance concentration in water, the degree of dissociation, valence of positive and negative ions as well as the mobility of these ions influenced by the temperature.  Our conductivity meters can detect the real number of ions. Regarding plugs, conductivity means the sum to know the number of ions as well as the total amount of salt. On the other hand, conductivity in water does not provide any information regarding substances so to get this information you will need a photometer. In a photometer measurement values are offered in relation to a reference temperature (f.e. 25ºC). To establish this relation almost all the conductivity meters have a internal temperature compensation. With the help of the conductivity meters a result of the total amount of salt in water can be detected.

If you wish to print a selection of conductivity meters from our printed catalogue, click the PDF symbol