|
|
|
|
Dust Particle Analysers
We can offer you a wide range of dust particle analysers to suit your needs. Dust particle analysers are used increasingly everyday in environmental measurements, factories and offices to detect the concentration of dust  particles which workers are subjected to. Such dust particle analysers are also used in industrial research and development or in industrial or educational clean rooms. Dust particle analysers Kanomax series are able to aspirate air in order to check the amount of particles. The dust particle analyser KM 3886 is a real time air cleaner with memory and software to transfer data to a computer. All dust particle analysers meet all current regulations and are delivered with a factory calibration done (optional ISO calibration certificate). Recalibrations (according to the internal quality control) can be carried out at any time after paying a calibration fee. If you can't find the dust particle analysers you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on: +44 (0)2380 987030 and our technical staff will advise you regarding our measuring instruments. Our engineers and technicians will be happy to help you with the dust particle analysers, and of course, with the other products in the field of regulation and control, and scales and balances.
Technical specifications about Dust Particle Analysers can be found at the following links:
|
|
- KM 3887 series Dust Particle Analysers 
(temporary or continuous measurement, memory, software, for 0,3 / 0,5 und 5 µm)
|
 |
|
- KM 3886 series Dust Particle Analysers
(for simultaneous measurements of five particle thickness, air velocity, memory, RS-232)
|
 |
|
- MicroDust Pro Dust Particle Analysers
(wide measurement range: 1 mg/m3 up to 2500 mg/m3, with memory and RS-232)
|
 |
|
- KM 3900 series Dust Particle Analysers
(measures 6 different sizes, flow of 28,3 l/min, memory for 5000 values)
|
 |
|
- KM 3792 series Dust Particle analysers
(fixed installation / for particles with a thickness of 0,2 y 0,3 µm, RS-485)
|
 |
|
- KM 3431 series Dust Particle Analysers
(monitor for dust with Scattering method, Range: 0,001 – 9999 mg/m³, analog output)
|
 |
|
Some definitions regarding Dust Particle Analysers
Total dust: Sum of respirable dust, thin and thoracic dust (respirable= solid, inhalable=liquid).
Respirable dust: Respirable dust is defined as the fraction of dust with a thickness of 100 µm approx. reaching alveolar region of the lungs (head area). In order to detect pollution in the air, you may need a particulate sampling pump with a flow rate of 3,5 l/min connection with a isokinetic probe.
Thoracic dust: Thoracic dust particles have a thickness of 10 µm approx. which are deposited anywhere within the lung airways and the gas exchange region. In order to detect pollution in the air, you may need a particulate sampling pump with a flow rate of 3,5 l/min connection with a isokinetic probe.
|
|
If you wish to print or view a selection of Dust Particle Analysers from our catalogue, click the PDF symbol.
|
|
|
|
You are currently at: Home / measuring instruments and test equipment / Dust Particle Analysers
|
|
If you have any questions, call our offices on: +44 (0)2380 987030.
|
|
This page in German  in Italian  in Spanish  in Croatian  in French 
|
|